Mitsubishi Electronics XD435U XD435U-G When using the projector in Europe only for XD435U

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated “dangerous voltage” within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT- LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception.

Use the attached RGB cable with this equipment so as to keep inter- ference within the limit of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

The attached power cords are to be used exclusively for this product. Never use them for other products.

When using the projector in Europe (only for XD435U):

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive 89/ 336/EEC “EMC Directive” as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/ EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable with this equipment so as to keep inter- ference within the limits of an EN55022 Class B device.

Please follow WARNING instructions.

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product.

Please, help us to conserve the environment we live in!

EN-2

Image 2
Contents XD435U XD435U-G EnglishWhen using the projector in Europe only for XD435U Compliance NoticeContents Important safeguards English Compliance Notice of FCC Compliance Notice of Industry CanadaTerminal board OverviewControl panel Remote control Bottom sideOperation range of the remote control Remote controlBattery installation Reception angle vertical Reception angle horizontalFront projection InstallationLayout of the projector Front projection, ceiling mountingProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device For Macintosh Projector + ComputerFor computer with Mini D-SUB Monitor OUT AudioUsing the adjustment feet rear Adjustment of the projection angleUsing the adjustment feet front PreparationBasic operation Power-onStatus Power Anamorphic mode Power-offVolume from the speaker Instant Shut DownThumbnail display Using the USB Memory ViewerHow to use the USB Memory Viewer Displaying thumbnails Displaying Jpeg imagesFeature Color Menu operationImage InstallationBasic operation Details on Transition Effect FeatureFeature Slide Show Setting Signal Signal User No need to adjust in normal useAdjustment of the image from the computer Image adjustmentImage adjustment Color temperatureTo cancel the password function Advanced featurePassword function StillReset of the lamp operation time Lamp replacementInterval of lamp replacement Images aren’t projected on the screen TroubleshootingPower Status Troubleshooting Images aren’t projected correctlyCleaning of the lens MaintenanceCleaning of the projector and the ventilation slots OthersAbnormal condition IndicatorsNormal condition Specifications Replacement part ConnectorsDimensional drawings unit mm What’s included in the boxVGA60 CGA84CGA85 VGA72Mitsubishi Electric Corporation