Wireless Powered Speaker, To Operate | AmpliVox S1204-70 instruction

WIRELESS POWERED SPEAKER

MODEL S1204-70 (USE FOR SW227)

(Dual Module Speaker with 169.445 MHz Transmitter)


				Line Out

	S1204 Speaker	S1670 MHz	Sound Source - 805A amplifier
	S1204 Speaker	S1670 MHz	Sound Source - 805A amplifier
		Transmitter	(Used with all AmpliVox PA Systems & Lecterns)
		Transmitter	(Used with all AmpliVox PA Systems & Lecterns)
			(except 905 Family)
	Connect S1670 - Mic input to amp’s line-out.

SET UP - INSTALL POWER SUPPLY
S1204 Speaker: The Battery Holder is standard and		holds 10 D-cell alkaline batteries. Optional Power Supplies may be substituted:

Model S1460, International AC Adapter (110/220V, 50/60Hz). Model S1452, 12 Volt DC adapter (automotive cigarette lighter plug- in), Model S1465, NiCad Battery Pack (requires S1460 to recharge).

S1670 Transmitter: (Frequency: 169.445MHz)

Power with 1 – 9 volt battery or 9Volt AC Adapter (not supplied)

S1204 Speaker: Loosen four thumbscrews and remove battery door from back of speaker. Remove battery holder from amplifier. Insert 10 new alkaline “D” cell batteries, observing polarity, or replace with fully charged S1465 NiCad battery pack. Carefully replace battery holder. Reposition battery door and fasten four thumbscrews.

S1670 Transmitter: Remove battery door on back of transmitter. Insert 1 new 9v alkaline battery, observing polarity, and replace door.

Do not mix battery types or attempt to recharge alkaline batteries - equipment damage, safety hazard or fire could result. Remove batteries if the amplifier is not going to be used for extended periods of time to prevent leakage.

TO OPERATE:

Cable the S1670 transmitter from its Mic input jack into the line out jack on the amplifier

1)Turn amplifier from audio source on.

2)Turn on the S1670 transmitter. Make sure frequency switch is set to ‘A’

3)Turn S1204 speaker amp on (large rocker switch). The red light should come on, indicating power is available.

NOTE: If for any reason the S1670 transmitter frequency is changed from position ‘A’ as shipped from the factory, please reset to ‘A’ (internal wireless receivers are preset to frequency ‘A’

NOTE: The frequencies used by the S1204 Speaker and the S1670 transmitter are not on clear channels and may be used by other devices. If the unit receives interference and if you are unable to use the S1670 transmitter, connect the audio source (Line Output) to the S1204 Line Input, using a cable with standard 3.5mm miniplug. Turn the VOLUME control on the S1204 Speaker completely down.

S1204-70 specifications

AmpliVox, a well-known name in sound amplification technology, offers a range of portable sound systems designed for various public speaking and presentation needs. Two standout models from their lineup are the AmpliVox S1294-70 and S1204-70. Both systems provide exceptional audio quality, advanced features, and user-friendly functionalities aimed at enhancing communication in diverse environments.

The AmpliVox S1294-70, often referred to as the "All-In-One" portable lectern, combines simplicity and sophistication. One of its main features is its lightweight design, making it easy to transport and set up for various events. The system is equipped with a powerful 50-watt amplifier that provides clear and crisp sound coverage for audiences of up to 3,000 people. It includes a built-in wireless microphone system, featuring both handheld and lapel options, enabling speakers to move freely during presentations without being tethered to a microphone.

In addition to its robust sound capabilities, the S1294-70 integrates Bluetooth technology, allowing users to stream audio directly from smartphones, tablets, or laptops. The device also includes a security compartment for storing microphones and other accessories, ensuring that everything needed is conveniently in one place. The long-lasting battery life ensures extended use during long events or presentations.

The S1204-70, on the other hand, caters to the needs of those seeking a versatile and dynamic sound solution. This portable sound system also boasts a 50-watt amplifier and can similarly reach audiences of up to 3,000 people. It features a compact yet performance-focused design, making it ideal for classrooms, outdoor events, or corporate functions.

One of the key technologies of the S1204-70 is its multi-channel capability, which allows the speaker to switch between multiple microphones effortlessly. This is particularly useful in settings where different speakers may share the stage. The system also supports Bluetooth audio input, ensuring that music or presentations from various digital devices can be integrated seamlessly.

In summary, the AmpliVox S1294-70 and S1204-70 are exemplary models in the realm of portable sound systems. Each offers unique characteristics and features that prioritize sound quality, versatility, and ease of use, making them favorable options for educators, event coordinators, and presenters alike. With the incorporation of advanced technologies, lightweight designs, and user-friendly interfaces, AmpliVox continues to lead the way in enhancing public speaking experiences.