Storm Series Outdoor Speakers
Mounting
Use the included Mounting Brackets to securely mount the speakers in the desired location.
To install the brackets on wood surfaces, vinyl siding, etc.:
1.Place brackets in desired location.
2.Mark location of holes at the narrow point of the keyhole cutout.
3.Drill pilot holes..
4.Partially tighten screws.
5.Place the brackets in position, then tighten the screws.
Screw
Location
Figure 3.7 - Screw Location
To install the brackets on brick or concrete surfaces:
1.Place brackets in desired location
2.Mark location of holes at the narrow point of the keyhole cutout
3.Drill holes using a masonry drill bit.
4.Insert masonry anchors into the holes previously drilled
5.Tighten screws partway into the anchors
6.Mount the brackets then tighten screws
Brick/Concrete |
Screw |
Masonry |
Anchor |
Figure 3.8 - Brick/Concrete |
To install the brackets on drywall:
1.Place brackets in desired location
2.Mark location of holes at the narrow point of the keyhole cutout
3.Drill holes using a drill bit.
4.Insert drywall anchors into the holes previously drilled
5.Tighten screws partway into the anchors
6.Mount the brackets then tighten screws
Drywall
Screw
Drywall
Anchor
Figure 3.9 - Drywall
© 2007 • All rights reserved. | Page 5 |