EAW KF761 specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

SYMBOL INDICATES CENTER OF BALANCE.

	45.00
	43.00
	CL
14.50
	3X GRILLES
	PARTIALLY SHOWN
			2X .18 X 24.00
	FRONT		RUNNERS
	21.00
2X 6.50		6.62	3.62
			CL
4.50	CL		INPUT
2X HANDLES
			ACCESS PANEL

SPECIFICATIONS KF761

A & E SPECIFICATIONS

The tri-amplified, three-way full range loudspeaker system shall incorporate 2x 12-in LF transducers, 2x 8-in slot-loaded cone transducers and a 2-in exit/3-in voice coil compression driver, also horn-loaded.

The LF transducers shall each be loaded into a proprietary bent-horn, with the horn mouths horizontally separated to provide controlled off-axis cancellations to match the MF beamwidth through the crossover region. The MF transducers shall both be coupled into a single large format horn. The HF transducer shall be coupled to an HF horn coaxially mounted with, and extended by, the MF horn. The system shall have a nominal dispersion pattern of 100° (h) when used as part of a KF760 or KF761 line array.

System frequency response shall vary no more than ±3 dB from 80Hz to 16kHz measured on axis. The single loudspeak- er’s subsystems (LF/MF/HF) shall produce Sound Pressure Level (SPL) of 96/107/112 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 135/140/140 dB SPL on axis at 1 meter. The subsystems (LF/MF/HF) shall handle 2000/500/150 Watts of amplifier power (continuous) and shall have nominal imped-

BACK

2X STACK		ACCESS
PAD		PANEL
POCKET	CL	TOP ONLY

24.50

1.50

TOP

DIMENSIONS APPLY TO

TOP AND BOTTOM

1.25

30.85

15.00

4X EAW PROPIETARY RIGGING SYSTEM

ances of 2x 8/8/8 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of void-free cross-grain-laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connector shall be a Neutrik NL8 with an additional NL8 pro- vided for connect through. Proprietary rigging is provided for arraying. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.

The tri-amplified, three-way full range loudspeaker system shall be the EAW model KF761.

	29.60
	4X .875 SQ
7.94	11.44
		8.02
12° ° CL
	6.96	8.61
4X HANDLES
	RIGHT SIDE
	DIMENSIONS APPLY
509148 (0)	TO BOTH SIDES
6/28/01

Manufacturing tolerances are +/- 0.13 and +/- 1°

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			KF761/0002963/2 pp	April 2002	Printed in USA