Installation Instructions
JF50S BRACKET
EAW DWG NO 480360 (0)
1. Inventory
Before beginning installation, inventory kit to items listed.
Item | EAW P/N | Qty | Description |
1 | 606073 | 1 | Bracket, HD50WM |
2 | 102246 | 2 | Screw, |
3 | 105062 | 2 | Washer, Neoprene, 3/8 I.D. X 1 O.D. |
4 | 105010 | 2 | 3/8 Washer, Flat, Black |
5 | 105011 | 2 | 3/8 Washer, Lock, Black |
WARNING: Installation should only be done by an experienced technician. Improper installation may cause serious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrity to support 300 pounds.
2.Mounting the Bracket
Due to various construction methods and materials used today, the hardware for securing the bracket to the mounting surface is not supplied. It is recommended that you consult a building professional for the proper mounting hardware before mounting the bracket.
3. Removing the Shipping Hardware
Remove the flat head screws from the top and bottom of the cabinet using a 7/32 Allen wrench.
4. Hanging the Cabinet
A. Place a neoprene gasket on
the bracket’s lower arm. Center it on the slot.
3
B. Position the cabinet between
the bracket arms. |
|
C. Align the bracket’s top slot to the |
|
cabinet’s |
|
D. Holding the cabinet in position, |
|
insert the screw with its |
|
lock washer and flat washer |
|
through the bracket’s slot and |
|
into the cabinet’s top threaded |
|
hole and hand tighten. |
|
E. Repeat step D through |
|
the bottom bracket slot. |
|
F. Position cabinet and | JF50S |
tighten the top & bottom |
|
mounting screws with a |
|
5/16 Allen wrench. |
|
(2) SCREW
SHCS
EAW P/N 102246 
(2) LOCK WASHER 3/8 EAW P/N 105011
5 | (2) FLAT WASHER 3/8 |
| EAW P/N 105010 |
(2) NEOPRENE |
|
WASHER | .12 |
EAW P/N 105062 | 11 |
|
|
|
|
| .00 | |
|
|
|
| 8 |
|
|
|
|
|
| .29 |
|
|
|
|
| 18 |
|
| .31 | THRU |
| 00 |
|
|
|
| ||
3X | Ø |
|
| 8 |
|
|
|
|
|
| |
2
| 3. | |
| 00 | |
5 | MOUNTING BRACKET | |
HD50SWM | ||
| ||
| EAW P/N 606073 |
3
1 Main Street • Whitinsville, MA 01588 • Phone (800)