EAW AS422e specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE)

INDICATES MOUNTING	POINT,
3/8-16 THREADED HOLE	(NUT PLATE).

INDICATES CENTER OF BALANCE.

24.62

22.50

	GRILLE PARTIALLY SHOWN
	FRONT
	ACCESS PANEL
		4.00	(1.50)
	CL
6.94
CL			5.00
			19.50
INPUT
	BACK
	(16.51)
A	13.64
	CL
			16.31	23.00
11.75
A			4.24
	19.39
	20°	20°
	TOP/BOTTOM
	16.56
	4.63
			CL
			18.60

509139 (0)	DIMENSION APPLY
	TO BOTH SIDES
5/22/01	SIDES

Manufacturing tolerances are +/- 0.13 and +/- 1°

SPECIFICATIONS AS422e

A & E SPECIFICATIONS

The low frequency loudspeaker system shall incorporate 2x 12-in LF transducers that shall be mounted in slanted baffles and separated vertically.

System frequency response shall vary no more than ±3 dB from 67 to 500 Hz measured on axis. The system shall produce a Sound Pressure Level (SPL) of 102 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of pro- ducing a peak output of 137 dB SPL on axis at 1 meter. The system shall handle 800 Watts of amplifier power (continu- ous) and shall have a nominal impedance of 4 Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of multi-ply, void-free cross-grain-lami- nated, exterior grade, Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resist- ant textured black paint. Input connectors shall be 2-contact terminal barrier strips. Eighteen (18) 3/8"-16 threaded mounting/suspension points (4 each top, bottom and sides, 2 on back) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.

The low frequency loudspeaker shall be the EAW model AS422e.

One	Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www. eaw. com
EAW	products are continually improved. All specifications are therefore subject to change without notice.			AS422e/2 pp	October 2001	Printed in USA