EAW SM200iH Dimensional Drawing, Specifications, Front TOP Bottom View A-A, View B-B, Left Side

DIMENSIONAL DRAWING

ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.

SPECIFICATIONS SM200iH

A & E SPECIFICATIONS

The two-way full range loudspeaker systems shall incorporate a 12-in LF transducer and a 2-in exit compression driver HF transducer.

22.50

4.75

FRONT

TOP

7.25

BOTTOM

1.56 19.37

VIEW A-A

1.25

6.12

The LF driver shall be mounted in a vented enclosure tuned for optimum low frequency response. The HF driver shall be loaded on an axis-symmetrical wave guide plate with a nom- inal coverage pattern of 90° (conical). An internal passive ￿l- ter network shall provide fourth order acoustical crossover and system equalization.

System frequency response shall vary no more than ±3 dB from 75 Hz to 18 kHz measured on axis. In passive mode, the loud- speaker shall produce a Sound Pressure Level (SPL) of 94 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 127 SPL on axis at 1 meter. It shall handle 500 Watts of ampli￿er power (con- tinuous) and shall have a nominal impedance of 4 Ohms.

In bi-amped mode, the low frequency section shall meet all passive mode performance criteria. In addition, the high fre- quency section in bi-amped mode shall produce a Sound Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 130 SPL on axis at 1 meter. The high frequen- cy section in bi-amped mode shall handle 200 Watts of ampli- ￿er power (continuous) and shall have a nominal impedance of 4 Ohms.

The loudspeaker enclosure shall be irregularly trapezoidal in shape and shall have rubber footpads on two sides allowing its ba￿e to be angled up 40° or 15°. The enclosure shall be available in mirror-imaged right/left con￿gurations. It shall

1.56 19.37

1.25

6.04

VIEW B-B

		10.96	A	2.12	2.31
		50°	1.56		4.11
	6.00 4.00		2.13
		A
	7.00	B			6.38
		2.87
		75°	B
510173	2.38	12.59	4.25		2.27
	LEFT SIDE			RIGHT SIDE
10/24/96
Manufacturing tolerances are		+/- 0.13 and +/-	1°

be constructed of multi-ply, void-free cross-grain-laminated Baltic birch plywood and shall employ extensive internal brac- ing. It shall be ￿nished in black catalyzed polyurethane. Input connectors shall be dual Neutrik NL4 Speakon. The sys- tem shall include a switch allowing it to be operated in bi- amp or passive powering mode. The front of the loudspeaker shall be covered with a vinyl coated perforated steel grille backed with open cell foam to protect against dust.

The two-way full range loudspeaker shall be the EAW model SM200iH. (Specify left or right.)

One	Main Street, Whitinsville, MA	01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com	www.eaw.com
EAW	products are continually improved.	All speci￿cations are therefore		subject to change without notice.	SM200iH	Rev (2) April 2007	Printed in USA