EAW MQV1394e specifications Dimensional Drawing, Specifications

SPECIFICATIONS MQV1394e

DIMENSIONAL DRAWING

C

L

15.71

8.09

52.35 (1.95)

A & E SPECIFICATIONS

The 3-way full-range loudspeaker shall incorporate a 15-in slot-loaded woofer, a 10-in MF cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm HF compression driver. The MF and HF devices shall be loaded on horns that provide a nom- inal 90° x 40° beamwidth. An internal passive crossover net- work shall offer either bi- or tri-amplified operation, config- urable via jumpers on the input panel.

VIEW A-A

DIMENSIONS APPLY

TO TOP AND BOTTOM

56.25

26.65

A

25.59

15.34

7.50

19.55 C

25° L

A 27.50

13.30 4.00

	5.00
12.75		C
			L
(15.30)

System frequency response shall vary no more than 63 dB from 70 Hz to 15 kHz measured on axis. The LF section shall pro- duce a sound pressure level of 95 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of produc- ing a peak output of 128 dB SPL on axis at 1 meter. The LF section shall handle 550 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms.

GRILLE PARTIALLY SHOWN

12.50

RIGHT SIDE

FRONT

PANEL

BACK

NOTES:

DIMENSIONS APPLY TO BOTH SIDES

When operated in bi-amplified mode, the MF/HF section shall

1. SYMBOL INDICATES MOUTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

2. SYMBOL INDICATES CENTER OF BALANCE.

3.WEIGHT APPROX. 215 LBS.

4.SHIPPING WEIGHT APPROX. 240 LBS.

0001955(A) 9/3/02

produce a sound pressure level of 108 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 140 dB SPL on axis at 1 meter. The MF/HF section shall handle 400 watts of amplifier power (AES

Manufacturing tolerances are +/-0.13 and +/-1°

Standard) and shall have a nominal impedance of 8 ohms.

When operated in tri-amplified mode, the MF section shall produce a sound pressure level of 109 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 141 dB SPL on axis at 1 meter. The MF section shall handle 400 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. The HF section shall produce a sound pressure level of 106 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 134 dB SPL on axis at 1 meter. The HF section shall handle 150 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be fin- ished in wear-resistant textured black paint. Input connectors shall be a terminal strip. A total of 16x 3/8”-16 threaded mounting/suspension points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The 3-way full-range loudspeaker shall be the EAW model

MQV1394e.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQV1394e/0002691/002/2 pp	October 2003	Printed in USA