Roof Curb Installation Rigging | Goodman Mfg SS-CPH90-150 instruction

Product Specifications

Roof Curb Installation — Rigging

Provisions for forks have been included in the unit base frame. No other fork locations are approved.

•Unit must be lifted by the four lifting holes located at the base frame corners.

•Lifting cables should be attached to the unit with shackles.

•The distance between the crane hook and the top of the unit must not be less than 60”.

•Two spreader bars must span over the unit to prevent damage to the cabinet by the lift cables. Spreader bars must be of sufficient length so that cables do not come in contact with the unit during transport. Remove wood struts mounted beneath unit base frame before setting unit on roof curb. These struts are intended to protect unit base frame from fork lift damage. To remove the struts, extract the sheet metal retainers and pull the struts through the base of the unit. Refer to rigging label on the unit.

Important: If using bottom discharge with roof curb, duct-work should be attached to the curb prior to installing the unit. Duct-work dimensions are shown in Roof Curb Installation Instructions Manual.

Refer to the Roof Curb Installation Instructions

for proper curb installation. Curbing must

be installed in compliance with the National

Roofing Contractors Association Manual.

Lower unit carefully onto roof mounting curb.

30”

Return

While rigging the unit, the center of gravity will

cause the condenser end to be lower than the

Evaporator Coil

supply air end.

Compressor 1

Bring condenser end of unit into alignment

Compressor 2

with the curb. With condenser end of the

Supply

unit resting on curb member and using curb

as a fulcrum, lower opposite end of the unit

until entire unit is seated on the curb. When a

rectangular cantilever curb is used, take care

to center the unit. Check for proper alignment

and orientation of supply and return openings

49”

with duct.

Corner & Center-of-Gravity Locations

Unit Weights	7½-Ton	8½-Ton	10-Ton	12½-Ton
Unit Weights	Weights (lbs)	Weights (lbs)	Weights (lbs)	Weights (lbs)
	Weights (lbs)	Weights (lbs)	Weights (lbs)	Weights (lbs)

Weight A	285	345	345	435

Weight B	285	325	325	345

Weight C	285	320	320	300

Weight D	285	300	300	240

Shipping Weight	1175	1310	1310	1350

Operating Weight	1135	1285	1285	1325

Note: These weights are calculated without accessories installed.

www.goodmanmfg.com

SS-CPH90-150

SS-CPH90-150 specifications

Goodman Manufacturing is known for producing high-quality heating and cooling systems, and the Goodman SS-CPH90-150 is no exception. This model is a condenser unit that showcases the brand's commitment to efficiency, durability, and advanced features. The SS-CPH90-150 is designed for residential and light commercial applications, making it a versatile option for various installation needs.

One of the main features of the Goodman SS-CPH90-150 is its high-efficiency performance. The unit boasts a 90% AFUE rating, which translates to significant energy savings over traditional heating systems. This efficiency is critical for homeowners looking to reduce their energy bills while maintaining optimal comfort levels indoors. Additionally, the unit comes equipped with a powerful 150,000 BTU input, providing ample heating capacity for larger spaces.

The unit employs advanced modulating technology that allows it to adjust its heat output based on the demands of the environment. This feature not only enhances comfort by maintaining a consistent temperature but also minimizes energy waste, further contributing to its efficiency. The Goodman SS-CPH90-150 also features variable-speed blower motors, which enable smoother airflow and quieter operation, enhancing the overall user experience.

Durability is another hallmark of the Goodman SS-CPH90-150. Constructed from high-quality materials, this unit is designed to withstand harsh conditions and has been rigorously tested to ensure reliable operation over time. The heavy-gauge, galvanized steel cabinet with a powder-coat finish provides added protection against corrosion, ensuring that the unit retains its aesthetic appeal and functionality throughout its lifespan.

Furthermore, the Goodman SS-CPH90-150 is equipped with an integrated control board that simplifies installation and allows for easier maintenance. This feature is particularly advantageous for HVAC professionals, as it reduces labor time during installation and servicing.

In summary, the Goodman SS-CPH90-150 is a high-efficiency condensing unit that combines advanced technologies, outstanding durability, and user-friendly features. It stands out in its category not only for its performance but also for its commitment to energy savings and environmental sustainability. Investing in this unit means investing in comfort and efficiency for years to come.