Graco 309524L important safety instructions Fluid Connections Accessories, Cart Mounting

Page 9

Cart Mounting

(FIG. 5)

You need to have 2 each of cart mounting bar 183485 and clamp 183484. See Accessories, page 26, to order.

1.Place clamps (AA) around the cart vertical post (DD) and secure to the heater mounting bars (ZZ) with M8 x 1.25 x 30 mm bolts (6) and lockwasher

(5).

2.Observe temperature ratings for the power cable to the terminal junction. Cable H07RN does not meet the required 221°F (105°C). An intermediate Type “e” junction may be required. Also see FIG. 7.

Installation

WARNING

To avoid rupturing a component, which can cause seri- ous injury, including amputation; read warnings, page 4, and follow the instructions below.

2.Provide a means for adequately handling fluid expansion caused by heat. Options include:

Use flexible hoses between heater and gun.

Install a properly sized accumulator down- stream from the heater.

Install a pressure relief valve (X) pre-set to relieve pressure when it exceeds the system maximum working pressure.

DD

6

5

AA

ZZ

05543-524

FIG. 5: Cart Mounting

Fluid Connections &

Accessories

(FIG. 6)

1.Install a fluid shutoff valve (T) in the heater’s 1/2-14 npt(m) fluid inlet; do not overtighten. Connect the fluid line to the valve.

Never install a shutoff device between the heater and gun as this will trap the heated fluid and not allow for expansion. If a fluid regulator is installed between the heater and gun, never use it as a shutoff device.

3.Install a fluid filter (L), drain valve (M), and fluid pres- sure regulator (N) near the heater’s 1/2-14 npt(f) fluid outlet. Then connect the fluid line.

X

N

L

T M

05545-524

FIG. 6: Fluid Connections & Accessories

309524L

9

Image 9
Contents Hazardous Location Heater shown Viscon HPHazardous Location Heaters ModelsNon-hazardous Location Heaters ApprovalsContents TranslationsManual Conventions Skin Injection Hazard Equipment Misuse Hazard Installation Typical Installation DrawingKey Selecting Tubing Chart NotesMounting Heater Wall MountingBracket Cart Mounting Fluid Connections AccessoriesRequirements For All Installations Hazardous Location Installation RequirementsElectrical Connections Wall Mounted Wiring Cart Mounted WiringGrounding To find your fluid’s Under-Boil temperature Determining Proper Fluid TemperatureEffect of Temperature on Viscosity Operation Pressure Relief ProcedureInitial Flushing Priming SystemSetting Heater Control Adjusting for SprayingRefer to FIG Follow Pressure Relief Procedure, MaintenanceFlushing Unclogging Fluid PassagesProblem Cause Solution TroubleshootingReassembly Notes Backup ThermostatRepair Primary Thermostat & ProbeThermostat Repair Hazardous Location Heaters Thermal Limit Sensor Control KnobHeater Block Control Repair Hazardous Location Heaters Hazardous Location Heaters PartsPart No. Description Qty Ref. No Heater Block Series Volts / WattsNon-Hazardous Location Heaters Enclosure Accessories Cable Clamp Kit Key Cable Clamp Kit 246303 InstallationMaximum Temperature Rise vs. Flow Rate Technical DataDimensions Graco Information Graco Standard Warranty

309524L specifications

The Graco 309524L is a versatile and high-performing airless paint sprayer designed for both professional contractors and DIY enthusiasts. This innovative tool stands out for its efficiency, ease of use, and excellent finish quality, making it a top choice for various painting projects, from small residential jobs to larger commercial applications.

One of the main features of the Graco 309524L is its robust power system, which delivers consistent pressure and flow. This ensures that users can achieve even coverage and a superior finish, reducing the likelihood of roller marks or brush strokes. The unit also boasts an adjustable pressure control system, allowing users to fine-tune the paint output according to the specific needs of the project. This feature enhances precision, particularly when working on intricate surfaces or detailed projects.

The Graco 309524L employs advanced technology in its design. It utilizes a "TruPulse" technology that continuously monitors and adjusts the pressure based on the requirements of the job. This results in a smoother application and optimal performance, leading to reduced paint waste and faster completion times. Additionally, the sprayer is equipped with a durable and lightweight frame, making it easy to transport and maneuver around job sites.

Another significant characteristic is the Rapid Clean technology, which simplifies the cleanup process. After completing a painting task, users can easily flush the system with water or solvent, ensuring that the sprayer is ready for future use without the hassle of a complicated disassembly process.

The Graco 309524L is compatible with a wide range of coatings, including latex, stains, and primers, broadening its utility for various projects. Its easy setup and intuitive controls enable users of all experience levels to achieve professional-quality results with minimal effort.

Moreover, the unit comes with a selection of spray tips and a flexible paint hose, providing versatility for different applications. Whether it's interior walls, ceilings, or exterior surfaces, this sprayer meets the demands of various projects with ease and efficiency.

In summary, the Graco 309524L is a reliable and innovative airless paint sprayer that combines power, precision, and user-friendly features. Its advanced technologies and versatile capabilities make it an excellent investment for anyone looking to enhance their painting experience, ensuring high-quality results on every job.