Goodman Mfg SS-CPG36-72 warranty Roof Curb Installation Rigging, Unit Weights Ton

Page 27

Product Specifications

Roof Curb Installation — Rigging

Provisions for forks have been included in the unit base frame. No other fork locations are approved.

•Unit must be lifted by the four lifting holes located at the base frame corners.

•Lifting cables should be attached to the unit with shackles.

•The distance between the crane hook and the top of the unit must not be less than 60”.

•Two spreader bars must span over the unit to prevent damage to the cabi- net by the lift cables. Spreader bars must be of sufficient length so that ca- bles do not come in contact with the unit during transport. Remove wood struts mounted beneath unit base frame before setting unit on roof curb. These struts are intended to protect unit base frame from fork lift damage. To remove the struts, extract the sheet metal retainers and pull the struts through the base of the unit. Refer to rigging label on the unit.

Important: If using bottom discharge with roof curb, duct-work should be attached to the curb prior to installing the unit. Duct-work dimensions are shown in Roof Curb Installation Instructions Manual.

Refer to the Roof Curb Installation Instructions for proper curb installation.

Curbing must be installed in compliance with the National Roofing Contractors Association Manual.

Lower unit carefully onto roof mounting curb. While rigging the unit, the center of gravity will cause the condenser end to be lower than the supply air end.

Bring condenser end of unit into alignment with the curb. With condenser end of the unit resting on curb member and using curb as a fulcrum, lower opposite end of the unit until entire unit is seated on the curb. When a rectangular cantilever curb is used, take care to center the unit. Check for proper alignment and orientation of supply and return openings with duct.

Corner & Center-of-Gravity Locations

 

 

 

 

 

Return

 

 

 

Condenser

 

 

 

 

30”

 

 

 

 

 

 

 

Coil

 

 

 

 

 

Evaporator Coil

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply

Compressor

37”

Unit Weights

3-Ton

4-Ton

5-Ton

6-Ton

Weights

Weights

Weights

Weights

 

 

 

 

 

 

Corner Weight (A)

100

110

115

130

Corner Weight (B)

170

180

195

215

Corner Weight (C)

105

110

120

130

Corner Weight (D)

170

180

195

215

Unit Shipping Weight

550

595

625

715

 

 

 

 

 

Unit Operating Weight

525

570

600

690

 

 

 

 

 

Note: Weights are calculated without accessories installed.

SS-CPG36-72

www.goodmanmfg.com

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Afue Configuraon NomenclatureHeating Capacity Operating Weight lbsShip Weight lbs Cooling CapacityCPG036 Product Specifications CPG036 B ModelsCPG048 0901DXXX 0903DXXX 0903BXXX 0904BXXX Cooling Capacity Product Specifications CPG048 B ModelsDrain Size NPT 410A Refrigerant Charge Cir #1oz Product Specifications CPG060 B Models CPG060 0901DXXX 0903DXXX 0903BXXX 0904BXXX Cooling CapacityGas Heating Capacity Total BTU/h Sensible BTU/h CPG072 1403BXXX 1404BXXX 1407BXXX Cooling Capacity Product Specifications CPG072 B ModelsTap Airflow Data CPG036BTurns Open H2O Airflow Data CPG036BAirflow Data CPG048B Airflow Data CPG048B Standard Direct-Drive Horizontal Airflow Data CPG060BAirflow Data CPG060B ESP In W.C Turns Airflow Data CPG072BExpanded Cooling Data CPG036B CPG036B 373 Expanded Cooling Data CPG048B42.2 12.3CPG048B 381 Expanded Cooling Data CPG060B55.1 15.31750 CPG060B2250 2000Expanded Cooling Data CPG072B 65.8372 154 164 CPG072BDimensions Electrical Entrance Locations Unit ClearancesUnit Weights Ton Roof Curb Installation RiggingRoof Curb Installation Sources may Always or the wiringInjury, or Failure to do so may cause property damage, personalWiring Diagram CPG036/480901D Single-PhaseDirect Drive Present Maycause property damage, personal230/3/60 0140L00980 REV B Multiple injury, orPower death Property damage, personalDisconnect Be present Wiring Diagram CPG036/48*3D Three-Phase, Direct Drive Installing this unit. damage, personal 208-240/3/60 0140L00981 REV B Multiple injury,or460-575/3/60 0140L00871 REV B Subject to change. the wiring diagram the most up-to-date Wiring Diagram CPG036/480453B Three-Phase, Belt DriveItem # Description Fits Model Sizes AccessoriesProduct Specifications

SS-CPG36-72 specifications

The Goodman Mfg SS-CPG36-72 is an advanced commercial package gas unit that represents a perfect blend of efficiency, performance, and durability. This unit is designed to meet the heating and cooling needs of a wide variety of commercial applications, offering flexibility and versatility. One of the standout features of the SS-CPG36-72 is its impressive cooling capacity, rated at 36,000 BTUs, making it suitable for medium to large spaces.

One of the key technologies integrated into the Goodman SS-CPG36-72 is its two-stage compressor, which allows for enhanced energy efficiency and improved temperature control. By operating at two different stages, this unit can match the heating or cooling output to the specific requirements of the environment, ensuring maximizing comfort while minimizing operational costs. Additionally, this model boasts a high SEER (Seasonal Energy Efficiency Ratio) rating, reflecting its performance in energy conservation during cooling seasons.

The SS-CPG36-72 also features advanced technology such as a built-in humidity control system that further optimizes the indoor climate. By maintaining the right humidity levels, this unit promotes a healthier environment and enhances overall comfort for occupants.

Durability is another hallmark of the Goodman SS-CPG36-72. It is built with a robust exterior cabinet that can withstand various environmental conditions, including harsh weather. The unit is also equipped with corrosion-resistant components that extend its lifespan and reduce maintenance needs over time.

The Goodman SS-CPG36-72 is designed for ease of installation and maintenance. Its compact design allows it to fit into tight spaces, and the accessible service ports ensure that technicians can perform routine checks and repairs without hassle. This unit also features a user-friendly digital thermostat, allowing for easy adjustments to temperature settings and energy usage monitoring.

In summary, the Goodman Mfg SS-CPG36-72 is a dependable choice for commercial heating and cooling needs, combining high efficiency, advanced technologies, and durable construction. With its two-stage compressor, humidity control capabilities, and ease of maintenance, this unit delivers a reliable and cost-effective solution for a variety of commercial environments. Whether it's a retail space, office building, or industrial facility, the Goodman SS-CPG36-72 is engineered to provide optimal comfort while ensuring energy savings.
Top Page Image Contents