Sony CFD-V20 operating instructions Precautions

Page 18

Additional Information

Precautions

On safety

As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only.

Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further.

On power sources

For AC operation, use the supplied AC power cord; do not use any other type.

The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.

Unplug the player from the wall outlet when it is not to be used for an extended period of time.

For battery operation, use six size D (R20) batteries.

When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion.

The nameplate indicating operating voltage, power consumption, etc. is located at the bottom.

On placement

Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

Do not place the player on an inclined or unstable place.

Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components.

If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun.

Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring- wound watches away from the player to prevent possible damage from the magnet.

On operation

If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate.

If the player has not been used for a long time, set it in the playback mode to warm it up for a few minutes before inserting a cassette.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

18

Additional Information

CFD-V20/V30.E_3-859-117-1X.U2/CA2/AU6/E92

Image 18
Contents CD Radio Cassette-Corder About this manual InformationOwners Record For customers in the United StatesTable of contents Playing a CD Basic OperationsWith the label side up Use these buttons for additional operations Volume pBasic Operations DisplayListening to the radio To improve broadcast reception For FMPlaying a tape Radio OFFVolume Recording on a tape Tips PressChecking the remaining time Using the displayChecking the total track numbers and playing time CD PlayerTo locate Press Locating a specific trackCFD-V30 TipPlaying tracks repeatedly Repeat PlayTo repeat Select Program Play To cancel Program PlayCreating your own program To change the current programUsing the player on batteries Choosing the power sourcesConnecting the AC power cord CFD-V30 only Inserting batteries into the remoteAdjusting the sound emphasis Setting Up Adjusting the toneReinforcing the bass sound Precautions Side a Tab for side a Tab for side B Troubleshooting Symptom RemedyGeneral Radio CD Player Tape Player Only V30Cleaning the tape heads and tape path MaintenanceCleaning the lens Cleaning the cabinetSpecifications Other SpecificationsIndex F, G, HW, X, Y, Z