Notes
•When you operate the player on batteries, the backlight in the display does not light (CFD- Z130 only).
•Use the AC power source whenever you record since recording consumes much power.
Tip
Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player.
3 Connect the black wires to
Setting Up
2Connecting the AC power sources
Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet.
3CFD-Z120/Z130 only: Inserting batteries into the remote
Insert two size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
4Using the player on batteries
Insert six size D (R20) batteries (not supplied) into the battery compartment.
To use the player on batteries, disconnect the AC power cord from the player.
continued