Daewoo Complete Guide to Your Portable DVD Player

Remote￿ Control

PREPARING THE REMOTE CONTROL

1. Open the cassette cover.

1

.Slide the cover in the direction of the arrow 2 while pushing down

2

the plastic retaining clip next to the cover as the arrow 1.

2.place the battery into the guide.

3.Insert the tray into the remote control.

!

• When you place the battery into the guide, make sure the polarity + is faced up.

OPERATING WITH THE REMOTE CONTROL

Operating DVD video player with the remote control.

The remote control must point at the remote sensor on the front of the player, in order for the DVD player to function correctly.

REMOTE SENSOR

Connecting to a TV

SETTING UP YOUR PLAYER

Step 1:connect the audio cables to AUDIO OUT of the DVD player..

Step 2:connect the yellow cable to the VIDEO on the side of your player.

(For TVs that support S-Video Output please follow the diagram on page 15.)

FOR GOOD RESULTS

TV Audio Input TV Video Input

White Red Yellow

1314