Basic Operations

Basic Disc Playback

1.Prepare the power supply.

Set the Power Switch to the ON position to turn the player on.

2.Load a disc.

Press the Open button to open the disc compartment lid. Insert a disc with the label-side up. Close the lid by hand (the lid will click into place).

•If a single-sided disc is inserted upside-down, the player will display “NO DISC” or

“BAD DISC”.

3.Start playback.

Make sure the AV Switch is set to AV OUT to use the player’s built-in LCD screen. Press PLAY to start playback (some discs may start playing automatically).

Play/Pause/Stop

•Press to play the disc for the first time.

•Press during playback to pause. Press again to resume playback.

•Press during playback to stop the disc (“Pre-Stop”). Press to resume playback at the time-point at which the disc was stopped.

•Press when the disc is “Pre-Stopped” to stop playback completely. (When is pressed, the disc will start playing from the beginning.)

Previous/Next (Skip)

•Press to skip back one track (DVD, CD, MP3, etc).

•Press to skip forward one track (DVD, CD, MP3, etc).

Reverse/Forward (Scan)

Normal

x16

x32

•Press to reverse through the disc. Each successive press of will change the rate of reverse playback.

•Press to fast-forward through the disc. Each successive press of will change the rate of forward playback.

Slow

Normal

x1/2

x1/4

x1/8

x1/16

x1/32

•Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate of slow-motion playback. Press to resume normal playback.

•Press STEP frame-by-frame playback. Each successive press of STEP will advance the video one frame. Press to resume normal playback.

Note:

Audio will be muted during fast-forward, fast-reverse, and slow-motion playback.