XDVD8183 OPERATION 
SCREEN Setup - Touch Screen Calibration
Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described.
Step 1
L1
1) Touch top left corner of screen.
Step 2
Step 3 & 4
Step 5 & 6
L2
2) Touch SCREEN icon.
L | |
3 | L |
| 4 |
3)Touch No in TS Calibration row.
4)Then touch Yes.
L5
Note: For proper calibration you must touch each pointer for 2 seconds. If pointers are not touched properly, the calibration sequence will start over until the calibration is done correctly.
5)Touch and hold the pointers as indicated on the screen for 2 seconds each.
6)Screen will automatically return to MAIN MENU, touch EXIT to return.
28