Quick Starting Guide
6.Press the ON button which is combined with the PLAY function again to start playback.
In general, the DVD already
inserted into the player will start reading automatically when power is turned on.
The DVD player will immediately start rendering the DVD program.
When you want to stop, press the STOP button, it will return to the
To power off the unit, press the OFF button and hold on for about 2 seconds.
The DVD player will automatically power off in three minutes after entering screen saver mode.
Connecting to a TV
SETTING UP YOUR PLAYER
Step 1:connect the audio cables to AUDIO OUT of the DVD player.
Step 2:connect the yellow cable to the VIDEO on the side of your player.
(For TVs that support
GOOD
TV Audio Input | TV Video Input |
Yellow
White
Red
•When connecting to a TV with PAL system, at first you should set the video output to TV from the setup menu (press SETUP, select TV under Component/ Video) then press P/N on the remote to set PAL for the default system is NTSC.
11 | 12 |