plawa-feinwerktechnik GmbH & Co.KG 7x manual Charging the Battery Pack, Detaching the Battery Pack

Page 41

 

OTHERS

41

CHARGING THE BATTERY PACK

1.Turn the player off. The battery pack will charge only when the POWER to the player is turned OFF.

2.Attach the battery pack to the player.

3.Connect the supplied AC adaptor and the power cord to the player. Charging starts, and thePOWER/CHG indicator illuminates orange. When the charging is completed, the indicator turns off.

Note:

1.While the charge is in progress, do not disconnect the AC adaptor and the power cord until the POWER/CHG indicator turns off. The charging time of a battery pack is approximately 4.5 hours and depends on environmental condi- tions.

2.The attached battery pack may get warm when you are charging it or operat- ing the player. This is not a defect.

3.The battery indicator is shown on the screen when the power in the battery pack is running low.

DETACHING THE BATTERY PACK

1.Turn the player off.

2.Disconnect the AC adaptor and the power cord from the player.

3.Turn the player upside down.

4.Slide the battery pack’s lock switch in the open direction, then slide the play- er in the correct direction to remove it.

PLAYBACK TIME

Generally, after the battery pack is recharged,its continuously working time is as follows. For example:

Model

Operating status

Continuous playing time

CINEMAN.7x

Play DVD, TFT on

about 3 hours

 

Play DVD, TFT off

about 5 hours

Image 41
Contents Page Safety Precautions Table of Contents Power Sources Important Safety InstructionsWhen Using Headphones Important Safety Instructions Important Safety Instructions Features Definition of Terms Main Unit Name of PartsRemote Control Connections Connections Preparations Before Operation USE Remote ControlPlayable Discs Marks shown in the following chart are used in the maunalBasic Operations TFT Picture Adjustment Play Discs When Playing DVDPause OSDSelecting the Subtitle Language Select a ChapterChanging the Audio Language When Playing CD DVD Menu Play Changing the Audio Channel OutputRoot Menu RootSelect with Number Buttons Function SettingMenu Setting Setup Menü Main Dolby Digital SetupTV Display General SetupTV Type OSD LanguageSpeaker Setup Audio SetupDolby Digital Setup CaptionsPassword Mode Password SetupPassword Change EqualizerPreferences Default ResetPreference Language SelectionOther Functions MP3 OperationSelect Tracks with Menu Play Discs in Various Ways Audio ModeMute Fast PlaySlow Play When Playing DVD or CDRepeat Play DVDPlay DVD or CD Repeat Some PartsSelect Subtitles Play DVDPlay CD Time SearchBookmarkdvd Using a BookmarkStoring a Bookmark Zoom PlayPress Play Mode until the screen shows Random Play Shuffle orDigest Play Playing DVDPress Digest after the unit stops Precautions for Disc AccessoriesOthers Trouble ShootingPAL/MULTI/NTSC Technical SpecificationsAttaching the Battery Pack Online-Service Support-CenterUsing the Battery Pack Playback Time Charging the Battery PackDetaching the Battery Pack Conditions and Attention