Lenco Marine DVP-722 owner manual Setting Audio Output, Changing Audio output

Setting Audio Output

1.Press SETUP on the remote control.

2.Use the direction keys( ) to select AUDIO SETUP and its sub-menu.

3.Press ENTER to confirm your selection.

4.Press SETUP to exit, or select EXIT SETUP to exit.

Changing AUDIO output

9	0		10+
SLOW
		ENTER
			SETUP
REPEAT	MARK	GOTO	ZOOM

AUDIO SETUP	SPDIF/OFF
AUDIO OUT
EXIT SETUP	SPDIF/RAW
	SPDIF/PCM

Note:

SPDIF/OFF:select this when you do not want to have digital audio signal output.

SPDIF/RAW:select this when the digital audio output is connected to an external amplifier with Dolby Digital or DTS decoder which gives 5.1 channel sound.

SPDIF/PCM:select this when the external amplifier has no decoder.

25