NextBase SDV1102-B operating instructions Digital Setup, Audio OUT, Sound Effect

DIGITAL SETUP ENG 39

The digital setup options are illustrated below:

AUDIO OUT

Highlight the AUDIO OUT option, and press the arrow buttons to choose the audio output mode you prefer. Press ENTER to confirm.

There are 3 optional audio output modes: SPDIF/OFF, SPDIF / RAW and SPDIF/ PCM.

SPDIF/OFF: Choose this setting to output analog signal, and there will be no signal is outputted from optical jack.

SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with an optical cable. When playing a disc recorded with Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be outputted from the optical output jack.

SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital stereo amplifier. When playing a disc recorded with Dolby Digital and MPEG audio formats, audio signals will be modulated into a 2-channel PCM signal,

and it will be outputted from the optical jack .

	L
DIGITAL SETUP
AUDIO OUT	SPDIF/OFF
SOUND EFFECT	SPDIF/RAW
DYNAMIC RANGE	SPDIF/PCM
DivX(R) VOD
EXIT SETUP

SOUND EFFECT

There are two sound output effect modes: NORMAL and SURROUND. You can choose SURROUND to enhance the output sound effect.

	L
DIGITAL SETUP
AUDIO OUT
SOUND EFFECT	NORMAL
DYNAMIC RANGE	SURROUND
DivX (R) VOD
EXIT SETUP

MOBILE ENTERTAINMENT

PDF 文件使用 "pdfFactory" 试用版本创建 wwwÿÿ .fineprint.cn