Macrom M-DVD902RV manual Battery + lead Yellow, ACC Power Lead Red, Ground Lead Black, Door wire

1. Battery + lead (Yellow)

To connect the positive terminal of the car battery.

2. ACC Power Lead (Red)

To ACC power lead powered when engine key position is ACC.

3. Ground Lead (Black)

Connect the lead to a good chassis ground on the car. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

4. Door wire

This wire connects the door sensor of car. Then the dome light can be switched by opening or closing door.

5. FM Antenna

This antenna send the signal to FM receiver.

6.AUX A/V, Input 1

7.AUX A/V, Input 2

8.AUX A/V, Output

An auxiliary A/V output is provided to drive an external monitor. This signal mirrors what’s being shown on this player. The volume function does not affect the Auxiliary A/V Output.

9. Polarity switch

Please slide to “-” at the left position if your vehicle’s power supply system is negative; Please slide to “+” at the right position if your vehicle’s power supply system is positive.

Notes: 1.Please slide it to a side fully.

2.Do not slide this switch after Place it at a position. Otherwise, it’ll be damage.

11