VEHICLE INSTALLATION
Installation Using the Headrest Bracket System
(Audiovox part number BRKT2 - sold separately)
1.Raise the headrest to get access to the headrest posts.
2.Clamp front bracket (A) and rear bracket (B) around the headrest posts.
3.Insert the four screws (C) in four places and evenly tighten the screws.
4.Install the player, at the attachment points, on to the hooks (E) on the mounting plate (F).
5.Slide the quick disconnect bracket (D) and DVD player into the rear bracket (B). Make sure it is locked into the bracket.
6.Secure the swivel LCD screen in place using the movable hook (G).
7.Rotate the player to the desired viewing position and tighten the knob.
To remove the player:
1.Press the buttons on both sides of the quick disconnect bracket (D).
2.At the same time, pull the quick disconnect bracket (D) out of the rear bracket (B).
A
B
Three
Attachment
Points
Back of Player
G
E
F
D
E
C 
8