N. Setup
1. General Setup Page
1)With no disc inside the player, press ‘SETUP’ to display the Main screen of the Setup Menu on the screen and “General Setup Page” appears. At the same time, “ 
” is highlighted. Press ‘SETUP’ again to exit the Setup Menu.
2)Press the ENTER button, “TV Display” is highlighted.
3)Press the 
or 
buttons to select the other menus in general setup page.
4)Press 
to enter the sub menu.
5)Press the 
or 
button to select the desired option in the sub menu and press the ENTER to confirm your selection.
6)Repeat steps
Note: Press 
to return the previous menu.
a)TV Display
*Normal/PS: When the player outputs signal to a normal TV, a nor- mal picture is shown on the full screen.
*Normal/LB: When the player outputs signal to a normal TV, a normal picture is shown on the screen with a black strip at both the top and bottom of the screen.
*Wide: When the player outputs signal to a wide screen TV, a wide picture is shown on the full screen.
b)Screen Saver
*On: Enables screen saver
*NOTE: The DVD player will enter the Screen Saver mode after ap- proximately three minutes if the same image remains on the screen.*Off: Disables screen saver (off)
c) Last Memory
*On: The unit will return to the last position on the disc.
*Off: The unit will not return to the last position on the disc.
Note: The Last position memory function will only work when the disc tray is OPEN or the AV In/Out is switched.
19