Wired Headphones
There are two 1/8” headphone jacks on the PROV716/PROV716T/PROV716G that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the PROV716/PROV716T/ PROV716G remote control.
Wired FM Modulator
The PROV716/PROV716T/PROV716G is equipped with an RF modulator, that allows you to listen to the PROV716/ PROV716T/PROV716G audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9, 90.3MHz). This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Source Select, Channel Select) or the FM Select button on the unit. Whenever the RF modulator is on, broadcast reception on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception.
AV1 Input
The video inputs may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To access the A/V inputs, turn the PROV716/PROV716T/PROV716G on and press the source button on the PROV716/PROV716T/PROV716G or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The PROV716/PROV716T/PROV716G is now ready to play the audio and video signals from the source connected to AV1 input.
AUX A/V Input
The PROV716/PROV716T/PROV716G will accept an audio/video input through the RCA jacks located on the side of the unit. The audio / video device could be a video game system, video camera, or other input device.
Video Out
The PROV716/PROV716T/PROV716G provides a video output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details.) This output will provide a video signal that duplicates the signal displayed by the PROV716/PROV716T/PROV716G to an additional monitor or video display. Please see your installer for more information.