USING THE TV
Connect a TV antenna or CATV cable or Satellite system to the TV antenna terminal before searching TV channels
1.Connect the TV antenna.
2.Connect the AC power cord.
3.Press the 
POWER button to turn on the unit.
4.Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select TV mode.
Manual searching for TV channels
1.Press the TV MENU button, then press the 
button to TV CHANNEL SETTING.
2.Press the 
button to select ANTENNA. Use the 
or 
button to select Air or CATV.
3.Use the 
button to select Auto Scan.
4.Press the ENTER button to enter sub menu of Auto Scan.
5.Use the 
button to select “Start to Scan” in the sub menu.
6.Press the ENTER button to start the search for TV channels.
7.The screen will show the first received channel when auto search is completed.
| RF CH | 13 |
| Found | 0 |
|
|
|
|
|
|
PRESS
MENU
TO EXIT AUTO SCAN
Watching Television
Viewing a television station after the auto/manual search for channels.
1.Press the FUNCTION button to TV mode.
2.Press the 
CH 
buttons (the 
CH+ or 
CH- button on the remote) to select a channel, or press the number button on the remote to select the channel you want to watch.
•For channels 1 to 9, enter
•For channels 10 to 99, enter the
•For channels 100 or over, enter
Note:
•When a channel is selected, the channel number is displayed on the top right corner of the screen. This number will disappear after a few seconds.
•When MUTE is pressed, the sound is mute and the “L O” indicator always blinks on the LCD display until MUTE is pressed again or VOL is pressed.
ATSC TV mode:
Press the DISPLAY button, the upper window will pop up, then press the DISPLAY button again, the lower window will pop up. Press the DISPLAY button once to exit.
NTSC TV mode:
Press the DISPLAY button, the upper window will pop up, then press the DISPLAY button once to exit.
- 24 -