D. INSTALLATION AND POWERING
1. | 2. |
3.
5. | 4. |
3
(X 4) | (X 2) |
Figure 1
TOOLS REQUIRED:
#2 Philips Screwdriver
#1 Philips Screwdriver
Utility or Razor Knife or Shears Wire Strippers
Upholstery hook tool (for removal of panels as necessary) Electrical Tape
Masking Tape
Multimeter (to verify 12 volt DC and continuity: Do not use a test light or logic probe)
Marker pen – to mark headliner Scribe (to mark trim ring if used)
Misc. electrical connectors (to connect to vehicle power source). Requirements will vary from vehicle to vehicle.
6