Audiovox D1700 Changing Settings During Play for VCD, Changing Setting During Play VCD

Changing Settings During Play (for VCD)

01	20 20	STEREO	OFF	OFF
1	2	3	4	5
OFF	OFF
6	7	8
1	TRACK Symbol

This field displays the current play track. Press the or key on the player or remote control to go to this field, then press or to make a selection. Press “ ENTER ”to confirm.

2 Play Time Symbol

This field displays the play time of the current VCD program in minutes, seconds format.

3 AUDIO Symbol

Pressing the” AUDIO “key and then the or key to switch between two track output (stereo), left speaker only (left), and right speaker only (right) sound.

8. Changing Setting During Play - VCD

4	PROGRAM Symbol
	This field displays whether a programmed
	play has been set Press the	or	key
	to enable or disable programmed play.
	Please refer to page 45 for further infor-
5	mation regarding programming.
	VCD Playback Control ( PBC ) System
	This field displays whether the VCD PBC
	is enabled. Press the or	key to en-
	able or disable this function. Please refer
	to page 40 for further information regard-
	ing Program Broadcast Control.
6	REPEAT Symbol
	This field displays the repeat preference
	for the current VCD. Press the	or	key
	to select between current chapter or full
7	disc repeat.
	A-B REPEAT Symbol
	Pressing this key on the remote at two
	separate times (points) during disc play will
	cause the disc to repeat play between the
	two selected points. Pressing the		or
	key will allow you to close or edit this
8	function.
	BOOKMARK Symbol

This key enables the positional memory function. Please refer to page 42 for de- tails regarding this function.

43