iPod DOCKING
If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the “Dock Cover” insert (included).
1.Use the iPod adaptor included in your iPod and insert it into the docking area. Your iPod can now be inserted into the docking port by placing the connector on the bottom of the iPod onto the connector in the docking bay.
2.Insert your iPod with its Connector faced downward and directly over the Dock connector on the unit.
Note: Please be careful when seating the iPod into the docking to avoid damaging the
3.Slide the FUNCTION switch to select iPOD mode. The iPod will start playing automatically and starts charging immediately.
4.Press the PLAY/PAUSE
button to pause or resume iPod playback.
5.Rotate the VOLUME knob on this unit to adjust your desired volume level.
Note : The Volume level cannot be adjusted by the volume control of your iPod after being docked.
6.Your iPod is charging even during playback.
Note:The recharge function operates in iPod and AUX mode only.
7. To remove the iPod from the unit, press and hold the PLAY/PAUSE button for three seconds to switch off the device and then gently remove it from the docking connector.
iPod playback control:
-Press the PLAY/PAUSE 
button to pause or resume the iPod playback;
-Press the iPod Skip/Search Forward 
or Backward 
button to skip to the next or previous song;
-Press and hold the iPod Skip/Search Forward 
or Backward
button for
13