Jensen SMP-xGBL, SMP-2GBL user manual Troubleshooting, Symptom Suggested Solutions

Page 10

>Confirm your selected function / setting / option under MENU or submenu;

>Save your new recording while in voice recording mode.

A-B / REC Button

Looped Playback Function (A-B)– While unit is playing back a music or voice file, tap once to define the start point A. Tap again to define end point B. The unit will start playing only the selected section automatically.

Tap A-B Button again to cancel the looped playback function. Hold to:

Recording (REC)

Voice recording

This feature offers high quality/one-touch voice recording for lectures, interviews or meetings.

In MUSIC play or stop mode, press the REC button to go directly into REC mode. The unit will start recording automatically.

During recording, a flashing “ “ (dot) will appear on the lower left corner of the LCD screen.

To stop recording, press the Mode Key once. The recorded file will be named and saved automatically to the non-erasable VOICE.DIR system folder located in the root directory. The saved files will be named MIC0001.WAV, MIC0002.WAV, MIC0003.WAV and so on. When a recorded file is saved successfully, the unit will automatically enter the VOICE playback mode.

Key Lock (Hold) Switch

You may lock all the control buttons on the unit to prevent accidental change to the intended function during operation by sliding the Hold switch down as indicated by the arrow mark. A key lock icon will appear if you attempt to press any button. To unlock, slide the Hold switch in the opposite direction of the arrow mark

ID3 Tag Display

This unit is able to display the title, artist, album, etc. of the current track during playback.

In case if the ID3 tag information is too long to be displayed all at once on the LCD screen, the hidden information will scroll from right to left across the LCD.

TROUBLESHOOTING

SYMPTOM

SUGGESTED SOLUTIONS

Unit does not turn on

- Check battery power, replace with a fresh battery if necessary.

 

- Check if the HOLD switch is engaged.

No music is heard in the

- Check the Volume level.

earbuds

- Check the earbud connection.

 

- Verify if the music file format is supported by this unit.

Cannot download music

- Check USB connection between this unit and your computer

into your unit

- Check if your unit is already full. Delete some files to make space if

 

necessary.

Product becomes frozen

- Remove the battery and allow the unit to reset itself for 5 minutes. Avoid

after an electrostatic

operating the unit in an extremely dry household environment again.

discharge

 

- 9 -

Image 10
Contents Digital Audio Player Dear Jensen Customer To establish a safe levelSafety Information Compliance with FCCLocation of Controls LCD Screen IndicatorsMain Unit Connecting to your Personal Computer Battery Power and WarningsInstalling/Replacing battery Downloading Music to Your UnitRemoving the unit from the computer For Windows users Function Menus and SettingsFor MAC users MENU-1 MusicMENU-2 Microphone MENU-4 SettingsMENU-3 Voice MENU-5 Erase Files MENU-6 aboutMusic Playback Operation MENU-7 ExitTroubleshooting Symptom Suggested SolutionsSpecifications Service