Wiring

Connecting to a Built-in Center Channel Amplifier

If your head unit has a built-in center channel amplifier, connect the positive (+) terminal from the head unit to the positive (+) terminal on the speaker (the striped wire). Connect the negative (-) terminal from the head unit to the negative (-) terminal on the speaker.

NOTE: To prepare the wires for connection, strip approximately 3/8" of the insulation from each wire, exposing the bare conductors. Twist the end of each wire before connecting.

NOTE: Speaker wire colors are for illustrative purposes only. Please refer to the owner's manual to determine the wiring colors for your radio.

GREEN/BLACK(-)

GREEN(+)	REAR L
WHITE/BLACK(-)
WHITE(+)	FRONT L
BROWN/BLACK(-)
BROWN(+)	CENTER
GREY/BLACK(-)
GREY(+)	FRONT R
PURPLE/BLACK(-)
PURPLE(+)	REAR R

JENSEN

HEAD UNIT

EXAMPLE

PAGE 3