Motorola EP450 service manual Keyboard Removal, PTT Disassembly

Page 52

Display Model Disassembly and Re-assembly:Disassembling and Re-assembling the Radio — General

6-7

 

 

6.4.1.4Keyboard Removal

1.Carefully pry the four keypad retainer locking tabs free from the housing use a scribe.

Note: Use care when removing the keypad retainer to prevent damage to the keyboard flex cable.

2.Lift the keypad retainer up from the bottom and slide the top tabs out.

3.Slide keypad retainer out of chassis carefully to prevent damage to flex cable.

CAUTION: Refer to the CMOS CAUTION paragraph (6.3) before removing the main board. Be sure to

!use Electrostatic Discharge protection when handling circuit boards.

4.Lift LCD keypad board out of housing (Figure 6-8).

5.Lift keypad out of housing.

Keypad Retainer

Flex Cable

Keypad Board

Keypad

Figure 6-8. Keypad Removal

6.4.1.5PTT Disassembly

1.If required, the PTT (Figure 6-9can be disassembly using a small screwdriver, as follows:

a.Insert the tip of a small screwdriver underneath the PTT and unsnap the top tab.

b.Pry the PTT away from the radio housing.

c.Inspect the two hooks. If bent or broken, the PTT must be replaced.

d.Remove the PTT seal.

HKLN4215A

December 3, 2003

Page 51 Page 53
Image 52
Page 51 Page 53
Contents EP450 HKLN4215A Product Safety and RF Exposure Compliance ForewordComputer Software Copyrights Document CopyrightsTable of Contents Display Model Disassembly and Re-assembly Appendix a Accessories Troubleshooting TablesList of Figures 13. Microphone and Speaker Wires Re-assembly List of Tables Related PublicationsModel Charts and Test Specifications Radio Model InformationModel Chart for VHF 146-174 MHz EP450, VHF, 146-174 MHz Model DescriptionVHF Test Specifications GeneralTransmitter ReceiverModel Chart for UHF 403-440 MHz EP450, UHF, 403-440 MHz Model Chart for UHF 438-470 MHz EP450, UHF, 438-470 MHz Model Chart for UHF 465-495 MHz EP450, UHF, 465-495 MHz UHF Test Specifications LAH65SDH9AA4NMIL Standards MIL-STDIntroduction Theory Of OperationMajor Assemblies If IC Motorola Part No Description Characteristics Application Test Equipment, Service Aids, and Service ToolsTest Equipment Service Aids Motorola Part Description ApplicationTest Equipment, Service Aids, and Service Tools Service Aids Programming/Test Cable 5mmPerformance Checks Power-Up Self TestGeneral RF Test Mode Service Monitor Test Set Power SupplyNo. Description Function Beeps No. of BKCVHF R2 UHF R1 UHF R2 UHF R3 Test Mode Test Name Communications Analyzer Radio Test Set CommentsPerformance Checks RF Test Mode Radio Alignment Procedures CPS Programming SetupRadio Tuning Setup Transmitter Alignment Options Initial Test Equipment Control SettingsReference Oscillator Warp Modulation Balance Attenuation Under Tx Align menu, select Reference Oscillator Warp FigureTransmit Power Tuning Transmit Power Window High PowerTo Perform Transmit High Power Tuning, do the following To Perform Transmit Low Power Tuning, do the followingVCO Attenuation When using test box RLN4460VCO Attenuation 25 kHz VCO Attenuation 12.5 kHz VCO Attenuation 20 kHzUnder the Tx Align menu, select VCO Attenuation 12.5 kHz Under the Tx Align menu, select VCO Attenuation 20 kHzDtmf Deviation Tuning Under Tx Align, select Dtmf Deviation FigureMDC-1200 Deviation Tuning Receiver TuningUnder the Tx Align, select MDC-1200 Signaling Figure Rated Volume Tuning Perform the rated volume tuning procedure as followsSquelch Tuning Manual Squelch TuningRssi System Level Tuning Auto TuneRssi Display Tuning Under the Rx Align menu, select Rssi Display TuningUtilities Radio-to-Radio CloningProcedure 12. Side Button LocationsRadio Alignment Procedures Radio-to-Radio Cloning Display Model Disassembly and Re-assembly Preventive MaintenanceCleaning Procedures Cleaning External Plastic SurfacesCleaning Internal Circuit Boards and Components Safe Handling of Cmos and Ldmos DevicesFront Cover From Chassis Disassembly Radio Disassembly DetailedDisassembling and Re-assembling the Radio General Antenna and Knob Removal Keyboard Flex Connection Dust Cover Disassembly Speaker and Microphone DisassemblyPTT Disassembly Keyboard RemovalChassis Disassembly Audio jack shroud can be removed from the main boardDust Cover Re-assembly Radio Re-assembly DetailedMicrophone and Speaker Re-assembly 12. Microphone Re-assembly Keypad and LCD/Keyboard Re-assembly 14. Keypad Re-assemblyKeyboard Retainer Re-assembly Chassis Assembly/Re-assemblyChassis and Front Cover Re-assembly 17. Main Board onto Chassis Re-assembly18. Microphone and Speaker Wires Re-assembly PTT Re-assembly 20. Fastening the ChassisMechanical View and Parts List 1 EP450 Display Exploded View and Parts ListMotorola Part Description Number MotorolaDecember 3 Non-Display Model Disassembly and Re-assembly Safe Handling of Cmos and Ldmos Devices Disassembling and Re-assembling the Radio General Antenna and Knob Removal Speaker Connector Shroud Microphone Speaker and Microphone Disassembly Chassis Disassembly Removal of Main Board from ChassisDust Cap Re-assembly 11. Speaker Re-assembly 12. Installation of Main Board onto Chassis 13. Microphone and Speaker Wires Re-assembly 15. PTT Re-assembly 1 EP450 Non-Display Exploded View and Parts List 16. EP450 Non-Display Radio Exploded View14Mechanical View and Parts List Troubleshooting Tables Power-Up Error CodesOperational Error Codes Error Code Possible Causes Corrective ActionTroubleshooting Table for Receiver Troubleshooting Table for Transmitter Troubleshooting Tables Troubleshooting Table for Transmitter Appendix a Accessories Carrying AccessoriesAntennas ChargersAudio Accessories HeadsetsRemote Speaker Microphones ManualsAccessories Appendix B Warranty, Service Support, and Replacement Parts WarrantyReplacement Parts Ordering Scope of ManualMotorola Online Mail OrdersTelephone Orders Fax OrdersMotorola de Mexico Service Center Motorola de Colombia Service CenterTechnical Support Appendix B-4 Glossary of Terms Term DefinitionReset

EP450 specifications

The Motorola EP450 is a robust and reliable two-way radio that has made a significant impact in the world of professional communications. Known for its solid construction and exceptional performance, the EP450 is a popular choice among various industries, including security, transportation, and event management.

One of the standout features of the Motorola EP450 is its impressive audio quality. Equipped with advanced audio processing technologies, the radio offers clear and crisp sound, ensuring effective communication even in noisy environments. This feature is particularly beneficial for users who work in fields where situational awareness and timely communication are crucial.

The EP450 operates on both VHF and UHF frequency bands, making it versatile for various communication needs. With 16 channels and a wide frequency range, users can easily switch between channels to avoid interference and ensure secure communications. Additionally, the radio offers a programmable feature, allowing users to customize button functions and settings, which enhances the overall user experience.

The battery life of the EP450 is another notable characteristic. It comes powered with a long-lasting rechargeable battery that provides extended usage on a single charge. This ensures that users can rely on the device throughout their shifts without concerns about running out of power. Furthermore, the EP450 features a battery save mode that helps conserve energy when the radio is not in use.

In terms of design, the Motorola EP450 is built to withstand tough environments. Its rugged housing is dustproof and can withstand exposure to water, making it suitable for outdoor use. Additionally, the radio's user-friendly interface includes a large display and oversized buttons, allowing users to operate it easily even with gloves or in challenging conditions.

Furthermore, the EP450 supports various accessories, such as headsets and external microphones, enhancing usability and flexibility in various operational scenarios. This adaptability allows users to customize their communication solutions based on specific needs.

In conclusion, the Motorola EP450 stands out for its superior audio quality, versatile frequency operation, long-lasting battery life, and rugged design. These features make it an indispensable tool for professionals who require reliable communication in demanding environments, proving its value across a multitude of industries.
Top Page Image Contents