Ericsson LBI-38378D manual General, Specifications, Transmitter, Receiver

LBI-38378D

GENERAL

Frequency Bands

146 - 162 MHz

157 - 174 MHz

136 - 150.8 MHz

Frequency Stability

Channel Capacity

Select Model

Scan Model

System Model

Maximum Frequency Separation

Channel Spacing

Operating Temperature Range

Maximum Relative Humidity

Battery Voltage

Dimensions (H x W x D)

less battery, knobs and antenna with Extra High Cap. Battery

Weight

less battery and antenna

with Extra High Cap. Battery

SPECIFICATIONS*

FCC TYPE	DOC
AXATR-182-B5	TR-182-D2
AXATR-182-C5	TR-182-D2

5.0 ppm

16

192

192

full bandsplit 30 kHz -30°C to +60°C 90% at 55°C

7.5 Vdc (nominal)

140 x 69 x 38 mm (5.52 x 2.72 x 1.50") 232 x 69 x 40 mm (9.15 x 2.72 x 1.58")

540 grams (19 ounces)

907 grams (32 ounces)

TRANSMITTER

Rated RF Power Output	6.0 Watts
High / Low RF Power Output	6.0 Watts / 1 Watt (programmable per channel)
Maximum FM Deviation	±5 kHz
FM Hum and Noise	-45dB (companion receiver)
Spurious and Harmonic Emissions	-75 dBc
Audio Response	+1 to -3dB (6 dB/octave pre-emphasis from 300 Hz to 3 kHz)
Audio Distortion	less than 3% (at 1000 Hz tone, 3 kHz deviation)

RECEIVER

Sensitivity (12 dB SINAD)	-116 dBm (0.35 μV)
Adjacent Channel Selectivity	-80dB
Critical Squelch	10dB SINAD
Intermodulation	-78dB
Spurious and Image Rejection	-80dB
Audio Output	500 mW (24-ohm load impedance)
Audio Response	+2 to -8dB (6 dB/octave de-emphasis from 300 Hz to 3 kHz)
Audio Distortion	less than 5% (at 500 mW)

*These specifications are intended primarily for the use of the serviceman. See the appropriate Specifications Sheet for the complete specifications.

3