Ericsson MTL-SX manual Specifications, General, Transmitter, Receiver

Page 3

LBI-38432

SPECIFICATIONS*

GENERAL

Frequency Ranges

FCC Type Acceptance Number

DOC Number

Channel Capacity

Frequency Stability

Channel Spacing

Operating Temperature Range

Maximum Relative Humidity

Battery Voltage

Dimensions (H x W x D)

less battery, knobs and antenna with Extra High Cap. Battery

Weight

less battery and antenna with Extra High Cap. Battery

TRANSMITTER

Rated RF Power Output

High / Low RF Power Output

Maximum FM Deviation

FM Hum and Noise

Spurious and Harmonic Emissions

Audio Response

Audio Distortion

RECEIVER

Sensitivity (12 dB SINAD)

Adjacent Channel Selectivity

Critical Squelch

Modulation Acceptance

Intermodulation

Spurious and Image Rejection

Audio Output

Audio Response

146 - 162 MHz

157 - 174 MHz

AXATR-182-B5 (146 - 162 MHz)

AXATR-182-C5 (157 - 174 MHz)

TR-182-D2

16

5.0ppm 30 kHz

-30°C to +60°C 90% at 55°C

7.5Vdc (nominal)

140 x 69 x 38 mm (5.52 x 2.72 x 1.50 ") 232 x 69 x 40 mm (9.15 x 2.72 x 1.58 ")

540 grams (19 ounces)

907 grams (32 ounces)

6.0Watts

6.0Watts / 1 Watt (programmable on a per channel basis)

±5 kHz

-45 dB (companion receiver)

-75 dBc

+1 to -3 dB (6 dB/octave pre-emphasis from 300 Hz to 3 kHz)

less than 3% (at 1000 Hz tone, ±3 kHz deviation)

-116 dBm (0.35 μV)

-80 dB

10 dB SINAD

±7 kHz

-78 dB

-80 dB

500 mW (24-ohm load impedance)

+2 to -8 dB (6 dB/octave de-emphasis from 300 Hz to 3 kHz)

Audio Distortion

less than 5% (at 500 mW)

*These specifications are intended primarily for the use of the serviceman. See the appropriate Specifications Sheet for the complete specifications.

3

Image 3
Contents MTL-SX Table of ContentsLBI-38432 Table of ContentsReceiver SpecificationsGeneral TransmitterOptions and Accessories Introduction FeaturesDescription Rear Cover AssemblyFront Cover Assembly Battery PacksSide View Front View Universal Device ConnectorInput or PIN Name Output USE ProgrammingOperating Tips Features Programmable on a PER Channel BasisFeatures Programmable on AN Overall Radio Basis Operator ManualPreventive Maintenance Accessories19D438678, Sh , Rev Block Diagram LBI-38432

MTL-SX specifications

The Ericsson MTL-SX is an innovative multi-technology radio system designed to support a variety of applications in the modern telecommunications landscape. As an integral part of Ericsson's portfolio, the MTL-SX brings together advanced features, high performance, and a suite of technologies that cater to both current and future demands of network operators.

One of the standout features of the MTL-SX is its support for multiple frequency bands. This flexibility allows operators to utilize existing infrastructure while efficiently transitioning to newer, more advanced technologies like 5G. The system is designed to operate seamlessly across various deployment scenarios, enhancing both coverage and capacity in urban and rural environments.

The MTL-SX is built on a software-defined radio architecture. This enables easy updates and enhancements, allowing telecom providers to adapt to changing market conditions without the need for extensive hardware upgrades. The ability to deploy new functionalities through software updates is a significant benefit that can reduce operational costs and improve service delivery.

Furthermore, the MTL-SX employs advanced antenna technology, including massive MIMO (Multiple Input Multiple Output), which increases spectral efficiency and elevates the quality of service. This feature is crucial for supporting high-data-rate applications and ensuring a reliable connection for users, particularly in densely populated areas where network congestion is a concern.

In terms of energy efficiency, the MTL-SX integrates intelligent power management features. These mechanisms optimize energy consumption based on real-time network demands, helping operators reduce operational expenses and minimize their carbon footprint. In an era where sustainability is a priority, the energy-efficient design of the MTL-SX aligns with global efforts to create greener telecommunications.

Complementing its hardware capabilities, the MTL-SX also supports advanced network management and orchestration tools. These tools provide operators with enhanced visibility into their networks, facilitating proactive maintenance and performance monitoring. By leveraging advanced analytics, operators can optimize their networks for better reliability and service quality.

Overall, the Ericsson MTL-SX stands out as a robust, flexible, and future-proof solution for network operators looking to enhance their service offerings in a competitive market. Its multi-technology capabilities, combined with software-defined architecture, energy efficiency, and advanced management tools, make it a key asset in the deployment of next-generation networks.