LISTENING TO RADIO
BASS BOOST Button
Press the BASS BOOST button for added Bass response. The BASS ON LED indicator lights. Press again to cancel Bass Boost and resume normal sound. The BASS ON LED indicator goes off.
OPERATION
1.) Make sure that the LOCK button is in the ‘Off’position. (The LOCK indicator does not appear in the display.)
2.) Press the POWER button to turn the radio ‘On’. An AM or FM Band frequency will appear in the display.
3.) If necessary press the BAND button to switch between AM, FM bands. The appropriate band indicator appears in the display to confirm your selection.
4.) Press the TUNING + or TUNING – buttons to select the desired station as follows:
•Manual Tuning
Repeatedly press the TUNING + or TUNING – buttons until the display shows the frequency of the desired radio station.
•Automatic Tuning
Depress and hold either the TUNING + or TUNING – button until the display begins to move then release the button. The tuner will search up or down until it finds the next strong station and stops on that station. Repeat this procedure until it stops on your desired station.
If you tune to an FM Stereo station the ST indicator will appear in the display.
5.) Adjust the VOLUME and BASS BOOST controls as desired.
6.) When you are finished listening press the POWER button to turn the power ‘Off’. The display will return to the correct time of day.
10
HK2227BL_120203.p65 | 10 |
2/12/2003, 14:21