CASSETTE MODE
Skipping Blank Tape
You can automatically skip sections of blank tape that last longer than 10 sec- onds. This requires the blank skip func- tion to be activated.
Note:
●The blank skip can only be set if a cassette is being played.
Switching Blank Skip On / Off
➮Press the MENU button 8.
➮Press the 
or 
button :until “BLANK SKIP” appears in the dis- play.
➮Press the 
or 
button : to switch the blank skip function on or off.
➮Press the MENU button 8or OK ;twice.
Selecting Tape Type
If you are playing a “Metal” or “CrO2” tape, you should set the tape type se- lector to “MTL ON”.
To select the tape type
➮Press button 1 MTL >.
Either “MTL ON” or “MTL OFF” will ap- pear briefly in the display.
Dolby* B Noise Reduction
You should switch on the Dolby func- tion whenever you play tapes recorded using the Dolby B process.
➮Press button 6 
>.
When the Dolby function is switched on, 
shows in the display.
*Noise reduction system manufactured un- der licence from Dolby Laboratories. The word Dolby and the
42