Getting Started
Connecting Power
Connect the
Plug one end of the supplied power adapter to the DC 12V Power Input Jack located on the rear of the unit. Plug the other end into an AC
It will take approximately 8 hours to fully charge the internal battery.
The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery.
Do not connect this unit to a power source other than that which is indicated here or on the label as this may result in the risk of fire or electric shock.
Use only the AC adapter supplied. Failure to do so may cause a fire or damage the unit.
Upon initial use, the battery should be charged fully (~8 hours) to ensure optimal performance and bat- tery life.
www.cobyusa.com | Page 15 |
|
|