Cobra Electronics 200GTL DX owner manual Frequency

Frequency Frequency

Your Mobile Radio

Your Mobile Radio

Frequency		•	Frequency	•
Three controls and one indicator are used together to set and display the radio			- -
frequency on which your mobile radio will receive and transmit signals. In this			4Frequency Display
			Receive and transmit frequencies are shown directly by the 6 digit numeric
connection, it is important to understand the frequency bands built into the unit
			display in 100 Hz increments.
and the way they are displayed on the Dual 7 Segment Display.
			Frequencies are also displayed on the Dual 7 Segment Display using a combination of
The 10 meter frequency range is broken down into four bands on your
			numerical figures and decimal points. The figures indicate the first two values after the
mobile radio. These are selected using the Band A / B / C / D knob.
			decimal point in the frequency, such as the 00 in 28.005 MHz. The right hand decimal point
			in the display indicates whether the third value after the decimal point in the frequency is
Band	Frequency Range — MHz
			0 or 5 — if the right hand decimal is visible on the display, the third value is 5; if it is not
A	28.000 – 28.495
			visible, the third value is 0. The left hand decimal point in the display (between the two
B	28.500 – 28.995		figures) indicates whether the two values before the decimal point in the frequency are
			28 or 29 — if the left hand decimal is visible on the display, the first two values are 29;
C	29.000 – 29.495
			if it is not visible, the first two values are 28. Refer to the examples in the following table.

D 29.500 – 29.700

Within each band, frequencies can be selected in 5 kHz or 10 kHz increments, such as 28.005 MHz in Band A or 29.455 MHz in Band C. These are selected using the Frequency Selector knob after the band has been chosen.

Frequency Display

000000 00

Frequency Display		Frequency	Channel Display
0	0	28.000	88
3	5	28.350
0	0.	28.005
0.0		29.000
0.0.		29.005
4	5.	28.455
			28/29 MHz	0/5 kHz
2.5		29.250
6.3.		29.635

- -4Band A / B / C / D

6 Digit Numeric Display Dual 7 Segment Display

This control selects the desired frequency band.

- -4Frequency Selector

This detented control is a 360º multi-position switch used to increase or decrease the operating frequency in 5 or 10 kHz steps within the selected band.

- -4+10 kHz

When this button is in the out position, the operating frequency is increased or decreased by 5 kHz with each click of the frequency selector knob. When the button is in the in position, faster tuning is available because the operating frequency is increased or decreased by 10 kHz with each click of the frequency selector knob.

12 English Nothing comes close to a Cobra® 13