Acoustic Research XMC90 Unit Description, Power On/Off Button, Standby Mode, Play Mode

MODEL XMC90 OWNER’S MANUAL

2.0Unit Description

2.1Power On/Off Button ( )

When this button is pressed, power is applied to the radio circuits from the standby mode, and the unit enters into the play mode (XM/FM/AM/AUX/iPod). When pressed again during any play mode, power is removed from the radio circuits and the unit reverts to the standby mode. The default play mode is XM.

(Standby Mode)	Press this button to enter into	(Play Mode)
	play mode from standby mode

	Press this button to return
	to standby mode from any
2.2 SNOOZE/Mute Button	play mode

When pressed during normal play mode (XM/FM/AM/AUX/iPod), the audio output is muted or disabled as indicated by the speaker icon in the upper right corner of the display screen. When pressed again, the mute function is canceled and audio is restored. While the alarm is active, press this button to enter the snooze mode.

Press this button to mute play mode audio

Press this button again to cancel the mute function

2.3 DIRECT Button (Preset)

During normal operation, direct selection of the radio frequency in the XM, FM or AM radio modes is possible. To change FM or AM frequency, use the CH Up/Down buttons or directly enter desired frequency using the number (1-10) buttons. To search radio frequencies in FM/AM modes, press the CAT Up/Down buttons. In XM mode, the CAT Up/Down buttons provide a jump to the various broadcast categories or genres. When the DIRECT button is pressed, Direct (DIR) disappears on the display, and is replaced with preset bank A, B or C. Each bank is capable of storing up to 10 radio frequencies in memory. The frequency is stored by pressing the corresponding number buttons (1-10) for 3 seconds, thus permitting memory storage of 30 frequencies. When this button is pressed and held, the list of stored frequencies in the current band can be viewed. Press the CH Up or Down buttons to scroll through the preset channel list.

VERSION V 0.0 Page 3 of 20