Setting the Alarm Clock

Model ER102 Owner’s Manual

Operation Guide Continued...

•Press and hold down the ALARM button.

•While holding the button, use the HR button to adjust the hours. The radio will automat- ically switch from AM to PM as you scroll through. Release the HR button when desired hour is found.

•While still holding the ALARM button, use the MIN button to adjust the minutes. Releasing the button when finished will store the alarm clock settings into the memory.

Activating/Deactivating the Alarm Clock

•To activate the alarm clock, press the ALARM ON/OFF button. An Alarm indicator will be displayed on the LCD in the upper right hand corner when the alarm is activated.

•To deactivate the alarm clock, press the ALARM ON/OFF button. The Alarm indicator will disappear, signaling the alarm has been deactivated.

Using the Thermometer and Freeze Alert

•The Temperature will automatically be displayed on the LCD when the unit is powered on.

•To adjust the temperature reading from Celcius to Fahrenheit, press the C/F/FREEZE ALERT button to switch between Celsius and Fahrenheit readouts.

•When the temperature dips below freezing, the radio will emit a continuous beeping to let you know this. Press the C/F/FREEZE ALERT button to turn the beep off.

Using the Earphone Jack

Plug in a set of earphones (not included) of your choice that have a 1/8 inch mono or stereo plug. When using earphones the built-in speaker will be switched off automatically. Note: Stereo earphones will work and sound will be heard from both sides, although the sound is not stereo.

Page 8