Uniden UBC 175xL manual Priority, Weather, Press I Delay

Page 11

DELAY

Your scanner can be programmed to pause for about three seconds after a transmission ends on any selected channel. This is useful when both sides of a conversation are transmitted on the same frequency.

To program Delay on a selected channel:

PRESS: IMANUAL Istep to that channel.

PRESS: I DELAY I

Display: DELAY The delay message will be displayed

To remove Delay:

PRESS: I DELAY' The message will disappear.

PRIORITY

It is often desirable to be alerted to a transmission occurring on a channel other than that to which you are listening. The priority feature samples any frequen- cy which has been entered into channel 1, every 3 seconds.

If a signal is detected on the priority frequency, (channel 1) when sampled, the receiver will remain tuned in to it until the transmission ceases, at which time the scanner will revert to the. last mode of operation.

To activate the priority function:

PRESS: I PAl I The priority message will be displayed.

To remove priority:

PRESS: I PAl I again and the priority message will disappear.

WEATHER

Searches all seven NOAA weather frequencies until locking on the one active- ly broadcasting in your area.

To search for local weather:

PRESS:

I

PRESS:

I

MANUAL'

WX IDisplay will indicate the weather frequency

being received.

11

Image 11
Contents Uniden@ Table of Contents Front Panel Controls Technical SpecificationsMemory BACK-UP Instructions Optional AntennaUnpacking General DescriptionControls AntennaSrch Hold DisplayProgram Keys Operation KeysScan Operating the ScannerPRI Press SearchProgramming Press QJ~0DQJ01 Limit Press QJ00D0001 LimitPress Hold Manual STEP-SEARCHManual Channel Selection LockoutWeather DelayPress I Delay PriorityUser Hints SpeedBirdies External SpeakerTrouble Checks 5anlronlc