Operation, Power, Source, Audio Mute | Jensen Tools MP6312 guide

MP6312i

OPERATION

Power

Press the power button (2) to turn the unit on. Press and hold the power button again to turn the unit off.

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range.

Source

Press the SRC button (6) to select a different mode of operation, as indicated on the display panel. Available modes include tuner (FM1, FM2, FM3, AM1, AM2), CD, auxiliary (AUX), SAT and iPod. CD, SAT and iPod mode only appear when the source is available.

Audio Mute

Press the mute button (2) to silence the audio volume. “Mute” appears on the display. Press mute again to restore volume to the previous setting.

Volume / Audio Control

To increase the volume, turn the rotary encoder (5) clockwise. To decrease the volume, turn the rotary encoder counter-clockwise. When volume is adjusted, the volume level will be shown on the display panel as a number ranging from “0” (lowest) to “46” (highest).

Press the MENU button (5) repeatedly to step through the following audio functions: bass (BAS), treble (TRE), balance (BAL), fader (FAD) and volume (VOL). The unit automatically exits audio control mode after five seconds of inactivity.

MP6312i	SAT
MP6312i	READY
MOSFET POWERED
		PTY
/		CH/CAT
	SCAN	AS
		iPod
	DN	UP
	20	21

Bass

To adjust the bass level from “-6” to “+6”, press the MENU button (5) until “BAS” appears in the display. Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the bass. “0” represents a flat response.

Treble

To adjust the treble level from “-6” to “+6”, press the MENU button until “TRE” appears in the display. Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the treble. “0” represents a flat response.

Balance

To adjust the balance from “12L” (full left) to ”12R” (full right), press the MENU button until “BAL” appears in the display. Turn the rotary encoder to adjust the balance between the left and right speakers. “L = R” represents a center balance.

Fader

LA B

VOL

REFAD

BAS

To adjust the fader from “12F” (full front) to “12R” (full rear), press the MENU button until “FAD” appears in the display. Turn the rotary encoder to adjust the fader between the front and rear speakers. “F = R” represents a center fader level.

FAD

		FAD
		STRE
AB	L	B A
AB	L

BAL

REFAD

BAS

RTEFAD

		S
	L	B A
AB	L

TRE