desired location, and wait approximately 10 minutes before permanently mounting to ensure that there is proper reception. The Weather Temperature Station should display a temperature in the OUTDOOR LCD within 3 minutes of
I.THE REMOTE TEMPERATURE SENSOR
The Remote Temperature Sensor can be mounted in two ways:
•with the use of screws, or
•using the adhesive tape.
A.MOUNTING WITH SCREWS
1.Remove the mounting bracket from the Remote Temperature Sensor. The bracket should snap off easily.
2.Place the mounting bracket over the desired location. Through the three screw holes of the bracket, mark the mounting surface with a pencil.
3.Where marked, start the screw holes
16