6)The default date “1” will flash. Press the “+” button to select the appropriate date.
7)Press the “SET” button to confirm the date, and to set the weekday.
8)The default weekday “MON” (depends on selected language) will flash. Press the “+” button to select the appropriate weekday.
9)Press the “SET” button to confirm the calendar settings, and to advance to select either 12 or
VII) 12/24-HOUR SETTING
1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 9 more times, until the “12” hour time display flashes in the time LCD.
2)Press the “+” button to toggle between 12 and 24 hour time.
3)Press the “SET” button to confirm the
VIII) SELECTING °F OR °C
1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 10 more times, until the default “°F” flashes in the time LCD.
2)Press the “+” button to toggle between °F and °C.
3)Press the “SET” button to confirm the °F or °C selection, and exit the Program Mode.
FEATURES & OPERATIONS
I)CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE)
There are three possible display modes to view the day, seconds, and temperature. The month&date/weekday/moon phase/indoor temperature is the default.
To change the display:
1)Press the “+” button. The display should now show the month&date/weekday/moon phase/seconds.
2)Press the “+” button a second time and the display will now show the month&date/seconds/moon phase/indoor temperature.
3)Press the “+” button a third time and the display will return to the normal display.
II)THE ALARM
A)SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25
7