La Crosse Technology WS-8056U Quick SET-UP Guide, Do not Press ANY Buttons for 10 Minutes

Page 4

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the temperature clock and remote temperature sensor 3 to 5 apart.

2.Batteries should be out of both units for 10 minutes.

3.Place the batteries into the remote temperature sensor first then into the temperature clock.

(All remote temperature sensors must be started before the temperature clock)

4.DO NOT PRESS ANY BUTTONS FOR 10 MINUTES.

In this time the temperature clock and remote temperature sensor will start to talk to each other and the temperature clock will show both the indoor temperature and an outdoor temperature. If the temperature clock does not display both temperatures after the 10 minutes please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 10 minutes you can place your remote temperature sensor outdoors and set your time.

The remote temperature sensor should be placed in a dry, shaded area. The remote temperature sensor has a range of 80 feet. Any walls that the signal will have to pass through will reduce distance. An outdoor wall or window will have 20 to 30 feet of resistance and an interior wall will have 10 to 20 feet of resistance. Your distance plus resistance should not exceed 80 ft. in a straight line.

NOTE: Fog and mist will not harm your remote temperature sensor but direct rain must be avoided.

To complete the set up of your temperature clock after the 10 minutes have passed please follow the steps below.

4

Image 4
Contents WS-8056U 433 MHz Radio Controlled Temperature Alarm Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 10 MinutesTemperature Alarm Time Zone Setting II Program ModeFunction Buttons Time Setting DST Daylight Saving Time SettingLanguage Selection for the Weekday 12/24-HOUR Setting Calendar SettingSelecting F or C Page Alarm Setting the Alarm ACTIVATING/DEACTIVATING the AlarmSuspending Alarm Activating the Snooze FunctionIndoor Temperature Remote TemperatureIV Mounting the Remote Temperature Transmitter Mounting with ScrewsMaintenance & Care Troubleshooting Specifications for WS-8056U TemperatureWarranty Information Mailsupport@lacrossetechnology.comFCC ID OMO-01RX receiver