La Crosse Technology WT-2165 instruction manual Troubleshooting

Page 16

TROUBLESHOOTING

NOTE: For problems not solved, please contact La Crosse Technology via e-mail or

phone, or visit our website, www.lacrossetechnology.com

Problem: The time and date will not set initially.

Solution: It usually takes overnight before the clock can receive the signal due to the interference the sun has on the WWVB signal. Wait overnight for the signal.

Solution: Computer monitors and televisions can cause interference with the signal reception. Please keep the clock at least six feet from electrical sources.

Solution: In some areas of the US, in particular on the East and West coasts, the signal is sometimes weak. It may take up to 72 hours before a good signal is received. The reception can be helped by placing the clock in a window facing Colorado, with the back towards Colorado.

15

Image 16
Contents Model WT-2165 Radio-controlled Travel Alarm Clock Table of Contents Inventory of Contents Detailed Setup Guide Battery Installation II. Programming A. Setting the Time About Radio-Controlled Time signal, Wwvb Programming includes manual time setting Daylight Saving Time Setting DST On will flash Page Page Setting the Alarms Release the MIN key to advance the minutes of the alarm III. Operating Screens Page IV. Traveling Troubleshooting Maintenance and Care Instructions SpecificationsRecommended Not a TOY. Keep OUT of CHILDRENS’ Reach FCC ID OMO-01RX receiver