La Crosse Technology WS-8055U Maintenance & Care, Troubleshooting, Problem, Solution

Page 10

MAINTENANCE & CARE

Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units.

Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings.

Do not submerge in water.

Immediately remove all low powered batteries to avoid leakage and damage. Replace with new batteries only, and of recommended size.

Opening the casings invalidates the warranty. Do not try to repair the units. Contact La Crosse Technology for Repairs.

TROUBLESHOOTING

Problem:

The LCD is faint.

Solution:

1)

Replace the batteries.

Problem:

“OFL” appears in the LCD.

Solution:

1)

Move unit to an area with warmer or cooler surrounding

 

temperature. Current surrounding temperatures are outside

 

measuring range.

Problem:

No reception of WWVB signal.

Solution:

1)

It may help reception to face the front of the Moon Phase

 

 

Alarm in the general direction of Ft. Collins, Colorado.

 

2)

Wait overnight for signal.

 

3)

Be sure the Moon Phase Alarm is at least 6 feet from any

 

 

electrical devices, i.e. TV sets, computers, or other radio

 

 

controlled clocks.

 

4)

Remove batteries for five minutes, reinsert and leave the unit

 

 

alone overnight without pressing buttons.

 

5)

If problems persist contact La Crosse Technology.

Problem:

Hour is incorrect (minute and date are correct).

Solution:

1)

Be sure correct time zone and daylight saving time are

 

selected.

Problem:

Moon phase is incorrect.

Solution:

1)

Check the calendar data.

 

2)

Check batteries.

 

3)

Read “moon phase” section in manual

Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.

10

Image 10
Contents WS-8055U Radio Controlled Moon Phase Clock Table of Contents Inventory of Contents Quick SET-UP GuideDetailed SET-UP Guide Battery Installation Moon Phase Clock II Time Zone Setting Program ModeFunction Buttons Time Setting III DST Daylight Saving Time SettingIV Language Selection for the Weekday VII 12/24-HOUR Setting VI Calendar SettingViii Selecting F or C II the Alarm Setting the Alarm ACTIVATING/DEACTIVATING the AlarmIV Indoor Temperature Suspending AlarmIII Moon Phase Activating the Snooze FunctionProblem Maintenance & CareTroubleshooting SolutionPower source SpecificationsTemperature Dimensions L x W x HWarranty work FCC ID OMO-01RX receiver