Installation
Installing to the PC monitors
Mounting bracket
to the PC monitor
Screw
Rubber cushion
Placing on top of the desk
Screw
Precautions
•Use only the supplied AC power adaptor for operating the system. Do not use any other AC power adaptors.
•After operating the system with the AC power adaptor, disconnect the AC power adaptor from the wall outlet if the system is not to be used for an extended period of time. The POWER switch on the left speaker does not turn the AC power adaptor off.
•Do not open the speaker cabinets. Refer servicing to qualified personnel only.
•Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.
•Should any solid object or liquid fall into either speaker, disconnect the AC power adaptor and have the speaker checked by qualified personnel before operating it any further.
•When the speaker cabinet becomes soiled, clean it with a soft cloth slightly moistened with a mild detergent solution. Never use alcohol, benzine or thinner as they may mar the finish.
•Although this system is magnetically shielded, as a precaution, do not leave recorded tapes, watches, personal credit cards or floppy disks using magnetic coding in front of the system for an extended period of time.
If the TV picture or monitor display is magnetically distorted
Although this system is magnetically shielded, there may be cases that the picture on some TV sets/personal computer sets may become magnetically distorted. In such a case, turn off the power of the TV set/personal computer set once, and after 15 to 30 minutes turn it on again. For the personal computer set, take the appropriate measures such as data storage before turning it off. When there seems to be no improvement, locate the system further away from the TV set/personal computer set. Furthermore, be sure not to place objects in which magnets are attached or used near the TV set/personal computer set, such as audio racks, TV stands, toys etc. These may cause magnetic distortion to the picture due to their interaction with the system.
If you have any questions or problems concerning your system that are not covered in this manual, please consult your nearest Sony dealer.
Stereo Active
Speaker System
Operating Instructions
Before operating the system, please read this manual thoroughly and retain it for future reference.
SRS-PC51
Sony Corporation © 1996 Printed in Philippines
Mounting bracket
Owner’s record
The model number is located on the front of the
Features
The Sony
Stand
Notes
Specifications
Amplifier section
Power output | 2.5 W + 2.5 W, <10 % T.H.D., 500 Hz |
| – 1kHz, 3.2 ohms |
Input | Input cord (stereo mini plug (2 m)), |
| stereo mini jack |
Input impedance | 4.7 kilohm (at 1 kHz) |
Speaker section
System | |
Speaker unit |
Supplied accessories | AC power adaptor (1) |
| Mounting brackets (2) |
| Stands (2) |
| Rubber cushions (2) |
| |
| Screws (2) |
Optional accessories | Plug adaptor |
| Connecting cord |
|
unit and the serial number is located on the inside of the left speaker. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No.
Serial No.
system with a
•The magnetically shielded speakers have little effect on a PC monitor or recorded tapes, etc. when placed close to them.
•Easy installation on both sides of a PC monitor with the supplied mounting brackets.
•Equipped with a headphones jack.
•The supplied mounting brackets may not fit some PC monitors. In such a case, place the system beside the computer on top of the desk.
•Clean the surface of the mounting brackets and the PC monitor before attaching the
•To attach the system to the PC monitor firmly using the
•If the picture on the PC monitor is distorted by the vibration from the speaker system, turn down the volume first. If there seems to be no improvement, try placing the speaker system on top of a desk etc.
•Depending on the mounting surfaces, there may be cases in which the mounting brackets becomes difficult to remove once attached. Also the
ø57 mm (2 1/4 in.)
Norminal impedance 3.2 ohm
Rated input power | 2.5 W |
General
Power requirement | DC IN 9V jack accepts the supplied |
| Sony AC power adaptor |
Dimensions | Approx. 80 x 206 x 146 mm (3 1/4 x |
| 8 1/8 x 5 3/4 in.) (w/h/d) |
| incl.projecting parts and controls |
Mass | Approx. 400 g (14 oz) (left speaker) |
| Approx. 350 g (12 oz) (right |
| speaker) |
Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information.
Design and specifications are subject to change without notice.
The CE mark on the unit is valid only for products marketed in the European Union.
WARNING
To prevent fire or shock hazard, do not expose the system to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
•Power output of 2.5 W + 2.5 W.
•IBB (Intelligent Bass Boost) circuit enable you to obtain powerful bass, regardless of the sound volume.
*WALKMAN is a registered trademark of Sony Corporation.