La Crosse Technology WS-7208U instruction manual Setting the time, SET key for 4 seconds

Page 7

1.Install 2 AA batteries in the remote temperature sensor. Make sure they do not spring free, or start-up problems may occur.

2.Install 2 AA

batteries in the indoor weather station. Do not press any buttons for at least ten minutes.

Setting the time

1.Press and hold the

“SET” key for 4 seconds.

2.The hour will flash.

3.Press and release the “+” key to advance the hour.

4.Press and release the “SET” key.

5.The minute is flashing.

7

Image 7

Contents WS-7208U Wireless 433 MHz Weather Station Table of Contents Do not Press ANY Buttons for 10 Minutes Quick SetupPage Inventory of Contents Battery Installation Detailed Setup GuideAdditional Equipment not included SET key for 4 seconds Setting the timeMinimum and Maximum Temperatures FeaturesResetting Min and Max Temperatures Adding Additional Remote Temperature Sensors optionalWeather Forecast Weather Icons Page Mounting Weather Tendency ArrowsIndoor Weather Station Remote Temperature SensorSolution TroubleshootingSolution Maintenance and Care Instructions Batteries-Alkaline recommended SpecificationsMeasuring Temperatures Temperature checkWarranty Information Page FCC Disclaimer FCC ID OMO-01RX Receiver, OMO-01TX Transmitter