Battery Change:
It is recommended to replace the batteries in the unit approximately every 3 years to ensure optimum accuracy.
FUNCTION KEYS
The simple design of this product features 2 keys.
RESET/+ Key:
•Press for 5 seconds to reset the TOTAL rainfall data “0”.
•Press and release to advance the value for the alarm.
ALM/SET:
•Press for 2 seconds to activate/deactivate alarm
•Press for 5 seconds to enter alarm setting
OPERATIONS
Setting the Alarm
•Press and hold the ALM/SET button until the alarm is flashing on the bottom screen.
•Advance the alarm value by pressing and releasing the RESET/+ button.
•Alarm can be set in 0.05” increments from 0.05” to 4.00”
•The icon ((•)) will appear when the alarm is turned ON.
•Press and release ALM/SET button to turn the alarm off.
•To view the alarm pres and hold the ALM/SET button. This will cause the receiver to beep if the set alarm value has already been reached.
Resetting TOTAL RAINFALL and 24 HOUR RAINFALL
•Total Rainfall: Press and hold the RESET/+ button. The receiver will beep, and the total rainfall will reset to 0.00”.
•24 Hour Rainfall: The 24 Hour Rainfall will reset to 0.00” every 24 hours. To reset the 24 Hour Rainfall to 0.00” in- between the 24 hour automatic reset, you must remove the batteries, wait 2 minutes, and then
Note: Removing the batteries will reset the Total Rainfall as well as the 24 Hour Rainfall.
6