La Crosse Technology WS-9016U instruction manual Problem, Solution

Problem:

No reception of WWVB time signal

Solution

1) Wait overnight for signal.

:

2) Be sure indoor weather station is at least 6 feet

from any electrical devices, such as televisions,

computers, or other radio-controlled clocks.

3)

Remove batteries for five minutes, reinsert and

leave alone without pressing buttons overnight.

4)

If there are still problems, contact La Crosse

Technology

Problem:

Hour is incorrect (minute and date are correct)

Solution:

Be sure correct time zone and daylight saving time

are selected.

Problem:

The LCD is faint

Solution:

1)

Set the LCD contrast to a higher number

2)

Replace batteries

Problem:

No remote temperature is displayed

Solution:

1)

Remove all batteries, reinsert into remote

sensor(s) first, then indoor weather station.

2) Place remote sensor(s) closer to indoor weather

station.

3)

Be sure all batteries are fresh.

Problem:

Remote humidity displays “- -“

Solution:

1) A temperature only sensor is being used and

displayed

2) The humidity is outside the range of 19-95%